Spec-D Tuning LED Chrome Housing Clear Lens Projector Headlights Compatible with 2006-2008 Mitsubishi Eclipse, Left + Right Pair Headlamps Assembly

Could have been brighter. But over all look great, the packaging they did a great job on, which ensured quality product through the delivery process.Price was realistic, but maybe could have been $10-20 cheaper. Regardless, worth the money and good product. So far have not had issues with condensation . Or fogging. However, send me another review questionnaire, in 6 months to a years and then I’ll tell u how they have held up. Thanks a bunch satisfied customer

These are so much brighter looking on the car than the others I had cuz they had a black background instead of the silver. Not hard to hook up either. Very happy with my choice.

Just finished install on a 2009 Mitsubishi Eclipse Spyder. Total install time was about 2.5 hours without applying much haste, and another hour to properly adjust the aiming of the high beams and the low beams. YouTube has a great install video on the Eclipse that really helped speed the process up because I knew where the bolts were and how to easily access them. Contrary to some forums, you do *not* have to remove the front bumper but it is helpful to remove the front wheels to improve access into the wheel well for 2 bolts and the eventual low beam aiming adjustments that will probably be necessary following installation. Bumper fascia bolts and plastic retainers across the front by the radiator can be removed to allow the bumper fascia to be peeled back a bit to allow access to the 3rd bolt on the inner corner of the headlights- I used a 1/4 socket wrench and the small 10mm socket and it fit pretty easily into the gap behind the bumper fascia when pulled open. Wiring up is pretty easy using the provided wire connectors. The YouTube video helped identify which wire to splice into (only one power wire and one ground to splice per side- pretty easy. The rest of the connections are merely reusing the factory plugs for the lights similar to changing a headlight bulb. On the Eclipse, you will reuse the amber front running light/turn signal bulbs and their current mounting blocks- given the hassle in accessing them for installation and the fact that they were very obviously old bulbs in a clearly visible location within the new headlight housing, I replaced the bulbs so they were new. Installation after the quick wiring splices was pretty much the reverse of removal. Aiming the headlights on an Eclipse was easy for the high beams and rather challenging for the low beams due to the location of the adjustment nuts (buried inside the corners of the car and up inside the fender well). Recommend leaving the wheel wells open after install until the lights are properly adjusted before closing up the plastic fender well liners- this will greatly aid in access for vertical adjustment of the low beams. The other adjustments can be reached from within the engine well with a 1/4” drive 8mm socket and a couple extensions and a swivel adjustment. Once adjusted, lights were fairly bright but not impressively so- very decent light but not a HID comparison. Overall, not too difficult to install and provide good light. They look much better than the original plastic headlight lenses that had yellowed out and frosted up in the sun. If they last a few years and don’t fog up, it will be a good value for the money. I keep a kit full of the plastic retaining plugs/pins and it was handy to replace those plugs/pins that inevitably broke apart during disassembly- recommend having this as well as any new light bulbs on hand, along with some electrical tape to waterproof your wiring splices. 9/10, would do again. Only reason for 4 stars instead of 5 is the average brightness of the lights. It’s more than adequate in brightness, just not impressively so.

I like the quality and how well they work. Is also nice to be able to hook of the different sets of lights to come on when u want them to tying into the existing headlight wiring. Drawback justFor the car is there is a lot of parts that must come off to get a he headlights out.

Not a bad light I give 3 / 5. Definitely not looks like anything on the picture. The top is not LED not even yellow it has 1 bulb behind (white). To install... well check youtube as you will have to remove the whole front bumper and the splash guards front of tires. I give 1/5 for install but it has nothing to do with the product itself. The cabling another thing: again check youtube, not just plug and play. It works, have better sharper light.

Upon inspection on the headlights first open the box it comes with everything you need to tap it in to the car that’s a plusThe light looks good and sleek allYou will not regret the all blck haloMust have for 4th gens

Save yourself the trouble. The low beam adjustment screws don’t work, the projector scatters the light to where it’s hard to see directly ahead and they’re not easily comparable with led bulbs. The worst part is, the led halos go out right at a year and the seller doesn’t seem to care or willing to do anything to make it right for selling defective equipment.

Is a great product so happy with it , thank you so much !