Oregon 164MLEA041 Single Rivet Guide Bar, 16"

I could not find a Toro bar anywhere after delaminating my old one after which I could never get it right again. But I found this tmodel on the oregn site that looked like it would fit (though it was not listed in teh models it fit) and indeed it does fit. The specs were all right so I thought it would. And got a good price on it here. Shipping took a while but I was not in a big hurry. It is just slightly longer than the Toro bar (maybe 1/8 inch tops) but close enough that the bar adjustment takes care of that. All the holes line up right and hte specs are all spot on. Got my saw working again like new. My saw is a model 51850.

I researched online and could not find any post on fitting a 16" bar onto the Makita XCU02 chainsaw that comes with a 12" bar. Researched the Oregon guide bar specs against the Makita XCU series chainsaw and this bar should fit, despite the fact that XCU02 is not listed in the chainsaw compatibility chart. Believe it or not, it fits perfectly! Now you have a low cost 16" chainsaw. Tried on a hardwood stump and the XCU02 have enough power to plunge into that stump and make descent cuts. That stump is as hard as a rock. Comparing with the 16" XCU series chainsaws with much higher price tag, the XCU02+16" bar still got the same chain speed as when you fit a 12" bar (no need to say), and that speed is about half that of the more expensive models. Besides that, XCU02 is a brushed model. For me, these are no problem as it is my gardening tool, not for a business. Cutting slower is no big deal, as long as it can cut.

I had seen a few conflicting reviews on whether this would work with an EGO 16" chainsaw, but decided to give it a try. I can confirm that it fits fine with the EGO CS1604 chainsaw--at least when also using the Oregon R56 AdvanceCut Chain (amzn item B000H2W40U). Initial fitment with both new items required bringing the adjustment back to minimum and then setting tension, but I had pretty much the same experience when using a new EGO bar and chain. That said, there are some differences between the EGO version and this standard version (see photos). This bar is indeed a little bit longer and has a slightly different profile at the tip. There are some holes near the tip which are positioned differently as well, but I'm not sure what function they serve and as far as I can tell this difference does not affect performance in my usage.

The bar is a good fit even though it is a little shorter and the chain still will fit

I use this on my Worx 40V chainsaw. And it works wonderful! It is significantly stronger than the one that came with it from the factory! Highly recommend this product!

After pinching my bar I needed a bar ,I checked the specs and found the bar which worked ,I bought a atlas battery powered saw from Harbor freight and asked if they sold the bar for replacement and was told no they didn’t,I am going to tell them about this Oregon bar that will work on their 16 inch saw so customers will have this option

I needed to replace both the bar and the chain on my DEWALT DCCS670X1 FLEXVOLT 60V MAX Brushless Chainsaw, 3.0AH battery and after using the reference guide on the Oregon website I came up with the following items:* Oregon 164MLEA041 .043" Gauge 3/8" Low Pro Pitch 16" Double Guard Bar* Oregon 16-Inch Micro Lite Chain Saw Chain Fits Husqvarna, Poulan R56* Oregon 54-026 Bar and Chain Lube, 1 QtA previous revier said they could not get the bar and chain on their DeWalt chainsaw but I had no problem. The trick is simply to loosen the chain tensioner completely BUT not so far as it stops turning, you'll need the play, put the chain around the bar, and guide, and then insert the bar into holding peg.Now there are some differences. This Oregon bar seems to be slightly wider and a bit stiffer than the DeWalt bar but maybe that's just because it's brand new.

According to Oregon this bar was supposed to work with the Dewalt flexvolt 16” chainsaw. Save yourself the trouble and buy the original Dewalt bar cause this one fits too tight and will not work correctly.