5V 40A Power Supply AC 110V/230V to DC 5V 200W Universal Regulated Power Transformer for LED Strip Lights

Works well, used to power led matrix. Have purchased a couple of theese with no issues.

I use this to power my 4x BitAxes with plenty of room left to add a couple more. Solid output and has been running 24/7 for over 3 months!

The media could not be loaded. this works great with a ESP32 development board running WLED and 10 meters of WS2812b LED RGB lights.

Bought to power two RGBW LED strips comprising of 259 LEDs. Each LED has RGB+W so I am draining around 60mA x 259 worst case appx 15A. Mounting holes have allowed me to affix vertically to the underside of my workbench in a narrow unused space tucked away (see photo). I have kept powered, with LED at full and the PSU remains cool with no noticeable volt drop.The metal work is quite thin, not flimsy, but would not take a lot of pressure to disform.Given the price, very please with the product.

Good PSU, I used for LED supplied with DigUno controller, although I think it could have a fan built into, as can get hot a bit

Although the product was used it worked ok when powered up and is still working now.

As many have already provided feedback, I just add something maybe new and useful for some.I've just measured idle consumption: ~5W (nothing connected on the DC side).Because the PSU will be hidden with no on/off switch within convenient distance, I intend to use a remote RF based mains plug to switch on/off.

The media could not be loaded. Bought this to supply 5v 5a to 5 servos controlling home made automated blinds. Worked so well i bought another to do the downstairs ones. Smaller than i expected which is good, gives a slight hum while its powered on, its not too noticeable unless you will keep it by your bed (i resolved this with a wifi plug). The mains guard could be better but i stuck mine in a junction box to keep it all tidy and safe. Highly Recommended .