aibikuRear Fender with Metal Braket for Xiaomi M365 Electric Scooter Replacement Part Accessory

Includes everything you need. The bracket is super sturdy. Good quality. No printed instructions, but it's not too hard to figure out. Great deal!

Did not see much in terms of others installing the metal bracket. And did not get instructions in the box so thought I would post. Rear fender is really easy to remove. Bracket requires you to use an exact-o knife to pry out the red strips on both sides where the wheel is connected. Then remove the bolts to the wheels. Attach the metal bracket to the new fender at the tail lights. Then line up the bracket and install the wheel bolts, then the fender to the bike. Do not tighten up anything yet. Next install the plastic spacers to line up the metal bracket where it meets the wheel bolts. Slowly tighten the wheel bolts and the fender. When both are tight, remove the spacers and use the longer bolts to secure the covers of the wheel bolts. Not especially difficult. You will need an allen wrench set and small screw drivers. Seems sturdy but so did my other aftermarket fender (no metal bracket) which broke after a month. I think the bracket will help. Will update if I have any problems.

I was so disappointed when I called Hover-1 to discover that they did not sell or provide a replacement fender for this model. My son broke it several weeks after he had it. I had to use some 2 part epoxy and it looked like crap. But here comes Amazon to the rescue! This thing fits and looks great. They even supply spacers to accommodate the thickness of the support bracket thickness where you attach it at the axle, so you can reuse the original cover. (See picture.)The only tricky part was the rear light, which is really not on the manufacture of this. I ended up splicing the wire to get the old fender off and reattaching it with the new fender. (Picture provided). I probably could’ve taken off the bottom battery cover to see if the light wire had a clip that I could’ve pulled through the housing and kept it complete. I highly recommend!

👍 good

Me agradó que no solo trae la pieza si no que también trae sus tornillos 👍👍👍💯

Definitely an upgrade with the metal bracket.Think before you install. Assemble the fender, bracket, light, light cable, and hook first. Then install to the axle.Required some soldering (for the wires) in my case for my Xiaomi Pro.

Extremely disappointed in the mud gaurd.Feels like it would hold up well, but I ordered it since the OEM that came on scooter broke after about 750 miles.This one only lasted a week before it snapped.And the rubber cover that goes over the latch that you have to put on after installing the mud gaurd on the scooter started tearing even though I was being as gentle as I could because it felt flimsy and cheap.The rubber cover lasted only a few days before being completely torn all around it after latch scooter closed about 15-20 times.The gunk in photos were from when I tried super glueing it. I got asuch off as I could before sending it back but it was just terrible.

I’ve replaced this rear fender 3 times, with white ones, which didn’t last close the stock part. This grey one doesn’t look that nice, but is tough enough to not touch the wheel on potholes even without the metal bracket which I think I’m installing later (or maybe I wont)

Did not get screws to hold the finder in place