Handlebar Bike Mount with 360 Swivel for GoPro11/10/9/MAX, insta360 GO2/GO 3, X3/X2/RS/R – 100% CNC Aluminum, 22-34mm Adjustable Clamp Works With Most Mountain Bikes

Very good product. It fulfills its function.

Although it didn't fit my handlebar moustache as snugly as I'd hoped I was able to make it work.

I like that it makes it hands free but it just adds bulkieness to the scope

So the camera mount portion(looks like fins) needed to be drilled out (don't drill the threads!!!) with a 13/64 drill bit in order to get the tension bolt through which could be a huge issue to anyone that is not mechanically inclined to do so, however the construction is all aluminum and seems pretty sturdy. It has a locking rotation mechanism with 30 degree positions, so 12 determined positions in the "360 degree" rotation. Seems to fit 22mm to 31.8mm(just barely). The bar clamp hole is around 28mm diameter in order to accommodate many different sized bars, but imo, they should make a 22mm version and a 31.8mm version since these are standard sizes and would allow a much better clamping force and reliability. Tightening too much will definitely result in a cracked clamp.

The way the pins go into the two pieces of the bracket, the bolts can only go down through the side with the camera mount - therefore it is NOT possible to mount this below your bars. If the threading on both sides was equal, you could mount it either way - but it is NOT

Sturdy metal fittings and it is easy to adjust but it requires an allen wrench (supplied) to tighten onto the handlebars. It's easy to tighten with the wrench but the wrench is easy to lose.

Works as expected. It is a little more robust than I expected and I like that.

Product will not clamp on properly, as much as i tried tightening it down it does not sit steady. It continuously rotates around and swivels camera up and down. I even tried tightening it down with some pliers and that didn't work.