Small Kwik Clip Christmas Light Hanger 1"(3/4) Fascia Boards MADE in the USA

These are the easiest way to string lights! I spent numerous hours and close to $100 with different versions of sticky hooks, and research trying to find a way to put up string lights that didn't involve drilling into my home. Finally I came across these. I figured id give them a try because i was desperate and ready to give up when the sticky hooks didn't work. Once they arrived I was able to put up all the lights very quickly. I was also pleasantly surprised with how secure these clips were and how much weight they were able to handle (I could leave a significant portion of the string of lights hanging and they held). The one thing I would suggest is to take a look at what size face boards you have as they come in different sizes. These clips were also equally easy to take off. you did have to be a little gentle taking them off as they clipped on so tightly. Only 1 clip however scraped paint off (on inside of face-board where no-one can see), but that was my fault for getting confident and starting to take them off carelessly.

Worked great last Christmas and I bought 2 more bags this year to finish out the run. I only bought one bag last year to see how they would work. Clips from last year still look brand new and none broke. Put up the lights tonight and all is well. They are well made. Held tight and did not hurt the wood all last Christmas season. Perfect size and easy to install and remove. My facia board is 3/4 and the 1 inch clips work great. Holds wire two ways, depending on how the clips fit best and the wire size. I've tried it both ways and both ways work great. Will never pound nails again.

These were great for hanging lights. Our new gutter guards wouldn’t allow us to use our old hooks.

They hold the lights great. They are easy to put up and the small size makes storing them easy.

I used these for icicle lights under my gutters. The clips are easy to use and so far have stayed in place, even through some heavy rains and high wind.

It was easy to slide the clips onto the eaves/fascia board around the house. And they have a secure fit. None have come lose. We have long icicles lights, up to 12 inches long, and the clips hold the lights up with no problem. I like that they come in a reusable Ziploc bag for easy storage without creating trash.

The hangers do fit the fascia as advertised and have held on during winds with gusts to 40 mph and temps from 60 to 20. I did have an issue with the clip/hook used on the hangers where you place the Christmas light cords. The clip/hook appeared wider in the pictures than they actually are. If they stated what the gap was...I missed it if it posted. If you are using a regular string of Christmas lights or a thin version of LED strip or tape lights these clip/hooks will work. However, I had already bought a thicker brand of strip/tape lights (GE brand) and they did not fit on/in the clip molded on these hangers. I DID NOT want to have to drill dozens of holes and use the screws and clips that came with the Christmas strip light for installation. I solved my problem by hot gluing a bunch of 3M hanger clips I had (they had used adhesive, but did not hold well in a previous use) that had wider clip/hook gaps. PERFECT! So it took a bit of arts and crafts hot glue work, but I made it usable for my needs.As I stated, these do stay on the fascia and should work on regular cords of Christmas lights to hang. If you use the heavy duty strip/tape lights they will not fit...unless you modify

These stayed on all of my fascia and trim boards for the duration of the Christmas season. The only issue I had--the first few I tried to remove took some paint with them. Once I figured out that I should pull them down by the wire hook, they came off clean. This should probably be in the directions.