eSUN PLA+ Filament 1.75mm, Enhanced Toughness 3D Printer Filament PLA Plus, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Light Blue

I have bought filaments from this company and very pleased with then, color and adhesion to bed very good. Overal very good product. I have used it with Elegoo Neptune 3 Pro and Bambu Lab P1P and filamnet of very good quality and strenght. Also after printing filament stays shiny not matt. I like it a lot and will recomend. Also used Bambu Lab filaments, Anyucbic which is not good, used Polymaker which I like. You can compare this filament with one of the best on the market which are more pricier and will performe. Very pleased with my buy. Would recommend.

Update:Well, life pulls a bit of a prank on me yet again.As I praised this filament to high heaven, I just ran in to a problem with my recent purchase.The spool in question is quite bad in terms of how it was spooled on the drum and that it is quite damp.Constant tiny pockets on the print sides. I dried it relentlessly, but it still keeps happening.I guess the moral of the story is, that there is always a bad batch and nothing human produced can be 100% consistent in quality.So just make sure you keep an eye out for bad spools and damp filament and perhaps just send it back if this happens. Or use it for test prints where quality is not a concern.Old:Granted, I haven't tried too many filaments yet, but when I bought different brands (two times), they were nothing but disappointment.As for this? This was always perfect!Pros:- Consistent quality (never experienced any changes in it)- Good selection of colors- No tangling- No drying required (or at least I never saw any difference in print quality even after a spool was sitting out in the open for weeks, in a kitchen, in an apartment with average humidity of 65-75%).- Can be printed very nice even with low temperatures as 190-195Cons:- lighter colors seem to be more brittle. If you leave it in a position where the filament is under some bending stress, it can snap at that point after a while. This can be the case with bowden tube printers.Yes, there are cheaper alternatives, but this filament has never let me down. And why change the tried and true?I cannot recommend this enough.

If you want a reasonably priced, high performing, low issue filament then look no further. I've been printing for three years and in that time I've only had three tangled reels and no quality issues. The layer adhesion is fantastic and it's very tough stuff for PLA. Just buy it, it's very hassle free and as you can see from the picture you can do anything with it. I've got reels over two years old and they still print like day one, you just have to store them right.

Overall, I found it to be a good quality material. The white color of the filament was especially nice and produced clean and crisp prints.However, I did experience a few issues with the filament. At times, the material would get stuck, and I had trouble getting the roll to spin properly. This was frustrating and caused delays in my printing process.Additionally, I noticed that the color of the filament changed when it became too hot, resulting in a brownish color appearing. This was a bit disappointing, as it affected the overall appearance of my prints.Despite these issues, I still believe that the PLA+ Filament 1.75mm is a good option for those looking for a reliable and affordable filament. The white color is particularly impressive, and the material produces clean prints when it is working correctly. However, it is important to keep in mind the potential issues with the material getting stuck and the color changing when it becomes too hot.

For the price, this is a great fillament, easy to thread and get started with. I had some adhesion issues to begin with and found it did not deal well with higher temperatures. I found the best temperature range for this is 200–205 for the nozzle and 60–65 for the plate, as anything higher will just cause problems with the print and adhesion issues. Once printed, it is completely opaque and very sturdy. It does dry rather fast, which is great for faster printers; however, the spool itself also dries out fast, so if it is left overnight with no print, there is a chance the threaded fillament may break and you will have to rethread it. Otherwise, a great product.

Grate basic filament, prints fine on my Ender 3, Ankermake M5C and Bambu Lab A1.Layer lines are not too noticeable and had no issues with adhesion.

I've used the grey pla+ for a while now and haven't had any issues with printing or the Spool winding. Works well and lasts pretty well

I purchased Esun after having a terrible experience with sunlu. Everyone recommended that I tried Esun so I did. This filament is filled with so much moisture. Fresh out of the box and plastic, all i hear is pop pop. I did dry this filament for 4 hours at 70c, which temporarily fixes the issue, then it happens again. I might have to try drying this longer. For now, I reside with 1 star review. On the bright side it is consistent when it does work. Majority of the time its print failures with horrible quality due to the moisture.EDIT: I was sent a replacement filament by esun and still had issues, I PID tuned my printer and it prints flawlessly on my Anycubic Kobra. My settings prints perfectly at 195C 65C. So yeah.. it wasnt really a moisture issue it was a temperature issue.

Cheap and good filament.

Estoy completamente impresionado con el filamento PLA+ de eSUN. Como entusiasta de la impresión 3D, he probado una variedad de filamentos, y este sin duda se destaca por su calidad mejorada y su notable tenacidad.Calidad de impresión:El PLA+ de eSUN produce impresiones de una calidad excepcional. La consistencia del diámetro del filamento y su uniformidad garantizan una extrusión suave y sin problemas. Las impresiones resultantes tienen una excelente definición de detalles y una superficie suave, lo que las hace perfectas para una amplia gama de aplicaciones.Tenacidad mejorada:Lo que realmente destaca de este filamento es su increíble tenacidad. He impreso varias piezas funcionales y estructurales con este material, y todas han demostrado una resistencia excepcional. Incluso en impresiones con formas complicadas o delgadas, el filamento PLA+ de eSUN muestra una flexibilidad impresionante sin sacrificar la integridad estructural.Facilidad de uso:Este filamento es muy fácil de trabajar. La temperatura de extrusión recomendada es precisa, lo que garantiza una adherencia adecuada y una fusión uniforme entre capas. Además, la bobina está bien enrollada y no presenta nudos ni enredos, lo que facilita su alimentación a la impresora y evita interrupciones durante la impresión.Compatibilidad y versatilidad:He utilizado este filamento en varias impresoras 3D de diferentes marcas y modelos, y ha demostrado ser compatible y versátil en todas ellas. Desde pequeños proyectos de bricolaje hasta impresiones de mayor escala, el PLA+ de eSUN ha cumplido con creces mis expectativas en términos de calidad y rendimiento.Valor por el dinero:Considerando su calidad superior y su tenacidad mejorada, el precio de este filamento es más que justo. Obtienes un producto de alta calidad que supera las expectativas, lo que lo convierte en una excelente inversión para cualquier entusiasta de la impresión 3D.En resumen, el filamento PLA+ de eSUN es una opción sobresaliente para aquellos que buscan un material confiable, resistente y de alta calidad para sus proyectos de impresión 3D. Lo recomendaría sin reservas y considero que merece cada una de sus cinco estrellas.

Come sempre questo marchio non tradisce.La qualità del materiale è ottima, diametro molto costante, stampato a 180mm/s con temperature 210/65, zero stringing, adesione al piatto ottima, praticamente con 0,2 mm di altezza layer non si vedono i passaggi tra uno strato e l’altro.Sicuramente consigliato.

Bought this again since it worked perfectly last time. I noticed they changed the packaging to be more environmentally friendly but it seems they changed the filament itself too and is now extremely brittle. If I don't use my printer for a few days and come back to it the filament is broken in multiple (3+) places, including inside the bowden tube. Needless to say it's a huge hassle having to clean out the bowden tube every time