MHQJRH M.2 2280 SSD heatsink, Double-Sided Heat Sink, with Thermal Silicone pad for PC / PS5 M.2 PCIE NVMe SSD or M.2 SATA SSD

I purchased two Western Digital 500GB WD Red SN700 NVMe SSDs for a RAID 1 setup in my QNAP TS-464 NAS, and paired them with these MHQJRH M.2 2280 SSD heatsinks. These heatsinks are an ideal match for double-sided NVMe drives like the SN700. Installation was quick and simple. The included thermal silicone pads applied easily and made good contact with the drive components on both sides. The aluminum heatsinks are thin but sturdy, and most importantly, they're slim enough to fit perfectly in the tight confines of the TS-464's M.2 slots without interfering with anything else. Temperatures remain stable even under moderate load, and I’m confident the heatsinks are helping maintain long-term reliability. If you’re using WD Red SN700s (or any other double-sided NVMe SSD) in a QNAP NAS or small form factor system, these heatsinks are a great value and a smart upgrade. Highly recommended.

I have two 2280 size M.2 NVMe SSDs in my new build and wanted to put heatsinks on them to, A. Help them live and perform as well as possible and, B. dress them up a bit and give them a finished look for my build. I chose these because they were inexpensive, appeared to be decently made, and had the right look for what I wanted. After receiving and installing them, I am so impressed by the superior quality and finish of these heatsinks that I'm writing this review of them, something I rarely ever do on Amazon. The heatsinks arrived in a very neat, high quality box a little bigger than a CD case with two clear adhesive seals, as per typical. The box included some warranty and instructional paperwork (printed in english) the two piece heatsink, three silicone thermal pads (one spare), a little ziplock bag with the six screws needed to assemble the heatsink (there were actually seven, a spare was included here too), and a little phillips head screwdriver for the screws. The inclusion of the screwdriver was a really nice touch, as the screws are quite small and many people may not have a driver small enough - I didn't and I have a pretty comprehensive set of tools so this was a lifesaver really. All of these items were neatly arranged into a perfectly cut, dense foam rubber insert in the box. The packaging gives the impression that this is some kind of delicate and expensive photographic instrument or something, not a little $12 M.2 heatsink, but that's the kind of quality were talking about here. No blow molded PTFE packaging here, the way my DDR4 RAM sticks and other, much more expensive components were packaged. I digress. The heatsink is a two piece, black anodized aluminum 'sandwich', the top half is clearly machined from aluminum billet, the bottom is thin metal so probably just watercut or punched, but was still nicely finished and anodized black and had white manufacturer printing on the bottom. Even this rather insignificant detail, which you will never see once this is installed, is of high quality and nicely done. The M.2 drive fits (obviously) in between these two pieces with a silicone thermal pad on each side. The pads not only facilitate heat conduction from the drive to the heatsink (as per usual) but also compensate nicely for any slight variations in thickness of 2280 length M.2 drives from different brands. The tolerances, machining quality and finishing of the heatsink parts is, as expected by now, superb and my two drives, one a Samsung and one Crucial, which were not precisely identical in thickness, mounted perfectly and very snugly into the heatsinks and looks very "OEM" and proper with these installed. I don't want to give the impression from all this that these are fancy or elaborate in any way, because they're not. There's no RGB, no visible nameplates, or any other extraneous bells and whistles, they are just simple and beautifully made and are a very nice aesthetic touch to your build, in addition their functional nature of helping dissipate any excess heat from M.2 drives, which I'm sure isn't vital to their operation or they'd all have them already installed. Many of these drives are sold with the brand's heatsinks installed (think mainstream "gaming" RAM sticks) and from what I've seen, most M.2s with heatsinks sell for $50 to $75, or even more, over ones without. There are quite a few different designs, finishes and colors of these aftermarket M.2 heatsinks available at varying price points, some getting up there a bit. In my opinion, you could probably find something equal or pretty close to equal in quality and finish to these, but I highly doubt you'd find anything significantly better at any price. These only cost $12, making it a no-brainer for me, especially over paying the additional $50 or more premium for a preinstalled HS from the SSD brand. I put a lot of thought and care into my builds, both in performance and aesthetics and little details like these are a big part of having a nice polished look and optimal performance in my gaming PCs. If you have M.2 drives in your gaming PC, or intend to install these - they really are great and very fast - and you don't wanna pay and arm and a leg for one with preinstalled heatsinks, you should definitely consider one of these Yateng Chinese made models, you could hardly do better and the price is right.

I bought this heatsink to improve the cooling of my PC and it works great. It fits perfectly and is easy to install. Since using it, my system runs much cooler even under heavy load, and the fan stays very quiet. The build quality feels solid and durable. It really helps prevent overheating and improves overall performance. Highly recommend if you need efficient cooling for your computer.

This saved my ssd and my PS5. I was having issues with my PS5 crashing and repairing the memory every time I would put the system into rest mode. I initially just pulled out the ssd think it was faulty. I gave this heat sink a try and now I have no more crashes. The install was super easy and quick. The fit was perfect, and the performance has been a savior.

I bought this to add a SSD to my PS5. It works well and fits the case. It comes with thermal pads a was easy to assemble. Some reviews on PS5 thermal protection is that a thermal pads and a heat spreader are all thats need. This goes beyond that for minimal cost.

Just purchased a new Samsung 990 EVO Plus SSD read that there is no Heatsink with this drive and that this SSD ran warm and under hard work that it got HOT, wanting too have a reliable OS drive that would last I wanted too Keep it cool. Was super easy to install, came with every thing you need to install your drive into this cooler including the small screw driver witch was a nice extra. final outcome the cooler kept my SSD 20 degrees cooler. Hopefully increasing the life of my drive.

Is this a necessary part for gen 3 m.2 drives... no. Do i love to tinker with my computer.... yes. Very low profile heatsinks. Fit under the cpu tower cooler and my 4070 with no issues. Lowered my m.2 temps on whichever drive your actively using by near 10°c. Drives run in the 50s under heavier use. Mine came with 3 thermal pads ( 1 extra ) extra screws and mounting hardware if you dont already have it. Also another small screwdriver. Excellent for some extra passive cooling for your m.2 drives

ممتاز 👍🏻

Rien à dire, produit correct avec des dimensions exactes pour les SSD NVME.

Leider passen die originalen Schrauben nicht, wahrscheinlich ist die Steigung des Gewindes eine andere. Die Schrauben (rechts am Foto) ließen sich nur mit äußerster Gewalt auf knapp über die Hälfte eindrehen, danach droht der Schraubendreher oder die Schraube nachzugeben. Das Blech wurde auf diese Weise nicht an den Kühlkörper gezogen und somit wäre der ganze Kühlkörper nutzlos gewesen. Ich habe dann zum Glück 6 Schrauben (links am Foto) mit einem minimal anderen Gewinde gefunden, diese passten auf Anhieb und ließen sich trotz minimal längeren Gewinde problemlos bis zum Anschlag eindrehen. (Schrauben aus einem alten Laptop) Zum Design sage ich mal nichts weiter, außer das die Beschriftung auf der Seite ist, die man nach dem Einbau sowieso nicht sieht ;-) Ich habe mit dem Kühler eine doppelseitig bestückte ADATA SX8200 Pro 1Tb gekühlt und es irgendwie geschafft die in ein ASUS x370 Pro Mainboard einzubauen. Eigentlich hatte ich immer gedacht das die doppelseitigen M.2 mitsamt Kühler nicht in die flachen M.2 Ports passen. Ich habe vorsichtshalber die unterseite der M.2 mit Captonband abgeklebt, damit es keine böse Überauschung mit den Mainboardbauteilen gibt. Die Kühlwirkung ist OK auch bei wenig belüfteten Gehäuse. Die 60°C Grenze habe ich bei Last nicht überschritten wobei mit einer besseren Belüftung sicher mehr drin ist. Zudem muss ich dazu sagen das ich den Controllerchip ohne Wärmeleit Silicon betreibe und stattdessen ein Kupfer Unterlagblech plus Wärmeleitpaste verwendet habe. Die Kupferbleche gibts fertig in zb. 20x20 oder 15x15mm in unterschiedlichen Dicken, bei einem großen "Auktionshaus" Da der Controllerchip der heißeste Teil an der SSD ist, würde ich da nie die mitgelieferten Siliconbänder nehmen. Die Hitzeverteilung ist mit Kupfer und Wärmeleitpaste einfach besser, zumal man dann auch mit weniger Luftkühlung auskommt.

Pese ha tardar en llegar, es buenísimo he conseguido bajar masomenos 20° la temperatura de mi SSD, de unos 68 a 42.

Esta muy bueno este disipador de calor, se lo puse a la SSD que le instale a la PS5 y funciona muy bien, ya no aparece a mitad del juego que cierres la aplicación porque la SSD está muy caliente. Esta súper fácil de instalar, no te lleva mas de 6 minutos