Micro Fiber Leather Car Steering Wheel Cover Stitch On Wrap with Needle & Thread Anti-Slip Auto Steering-Wheel Case DIY 14 Inch for Honda Civic Etc.Black

This steering wheel cover looks and feels great in the hands and elevated the interior of a “new to me” used car. Perfect fitment and does not add excess bulk to the steering wheel. The decorative stitching is a nice touch too.I searched for installation videos on YouTube and decided on a single needle baseball stitch (through the holes, not the loops). I wanted a secure and comfortable grip, without all the stitches sitting on the outside of the cover, and I’m very pleased with the results. I tried tucking in the unfinished edges at the steering wheel spokes like I’ve seen others suggest but I didn’t like how bulky it looked and left the edges alone.Install took roughly 2.5 hours because I took my time since there isn’t really a chance for “do-overs” with this cover. Start your stitching and end with knots toward the back of the wheel to hide them. I love crafts and diys projects so this was fun for me while others might find it tedious and annoying.I tore through one hole on the left “bump” of the steering wheel (see pic with arrow) because I pulled too tightly but the black thread blends in well and hides the mistake. The right bump came out better as I got used to the stitch pattern. I also stretched the cover a bit in that spot to help it reach.Overall, I highly recommend this item. I would purchase again for another car.

I LOVE the way this cover looks on my car! But if you don't like DIY projects, don't buy this cover! It took me close to 1 1/2 hours from start to finish, but I took my time to make sure I didn't mess up the stitching. No slip-on cover is going to look this good.As for the negatiive reviews people have posted:Yes, the cover is tight on the wheel...if it wasn't you couldn't get that professional look. It takes a little patience to fit it on correctly.There is PLENTY of thread. There were two small bags of thread and two needles included with my cover. I only opened one bag and had about four feet of thread left over from that bag.The directions shown in the description show exactly how to thread the cover. Just take your time. If done correctly, there is no way to break the needle.Only time will tell to see how long it will hold up, but for $10 you can't beat the professional look of this cover!

This is my second one. The first one I put on my 97 Ram, this one went on the 99. Watch the videos on YT and it is not too tough. Plan to spend about 45 minutes putting it on. Other than that, it’s a far superior product than the slip on ones or the old vinyl steering wheel covers. Just a side note, the cover fit a little tighter on the 99 Ram than the 97, but that might be due to the excessive wear on the 97(345,000 miles). Either way, I would still put them on again.

Good wrap but will not buy again only because I do not want to install it. It fits the steering wheel well and looks good but it was a nuisance for me to install it. Very tempted to have someone else put it on instead. Not as smooth once installed and stretched over the steering wheel. You we can feel all the edges and stitching which I’m sure will soften up some with time but then it is better than the ‘too’ smooth or slick steering wheel I have.

It took me 5 mins to watch a video how to do baseball stitch and 1 hour to do it. It is probably much more easier if you take the wheel off or do the stitching method from the product video

The 15" fit our 2019 Cherokee perfectly.It took me about an hour to stitch it but it looks great and didn't make the wheel feel fat like the slip on kind.Pay no attention to reviews about the needle being dull or not being able to stitch around parts of the wheel.The needle is supposed to be dull as the pictures from the seller and reviews clearly show you loop the thread through the existing stitches. You do NOT try to push the needle through the leather. Also when you get to a "spoke" in the wheel you either tie and cut the thread and start again on the other side or you thread it through a few of the loops on the back side untill you reach the other side of the "spoke".I could make a video on technique but I aleady put mine on. Plus there are likely some on YouTube already.Basically if you have any common sense and and can focus on a task for more than 10 minutes you can install this.

Took a little time to stitch it on, but is so worth it! It fits perfectly, adds cushion but not too much, and has turned an old sticky steering wheel into one that I love to hold on to. Also, in this age of covid, I wipe surfaces in my car a lot and it holds up to the alcohol wipes that I use on it.

The cover it self was easy. I watched several videos on YouTube to understand how to sew and what thread design to use.Took me about 2-3 hours taking my time. Patience is virtue when you do this.

The small size fits perfectly on my 91 stock miata wheel. Only downside was the width of the wrap/cover was about 1/2 inch too wide, as the stock wheel is pretty thin. Poked some new holes a 1/4 inchbin from either side and it fit perfectly! We'll see how long it lasts, but overall it feels great!Edit: June 7, 2021. Unfortunately it seems it is not as stretchy as I was led to believe. Only been installed a for a month or two, and the stitched seem at the bottom of the wheel has begun to tear (see image). Other than the tear it still feels great, just upset that all the hard work I did and it tore in a place that was done at the manufacturer.

Installed on a F150 steering wheel that was crumbling at the 10 and 12 oclock positions. Youtube how to install and it's fairly simple. Took me approx 1 hr from start to finish. DO NOT pull too much on the stitching when you start off the first 2 to 4 holes, not enough flex in the pleather at the beginning and it will tear the holes. That was the only issue I encountered and I managed to cover up that little mistake. Overall great product. The whole family commented on how awesome my "new" steering wheel looks!

Visualmente se mira espectacular pero le falta mucha calidad en la costura , en la union de la la pieza se rompió por completo ,siendo la circunferencia correcta al quererla colocar se estira un poco y fue suficiente para romperse definitivamente la regrese falta mucha calidad solo es apariencia bonita , suerte

This steering wheel cover looks so cool it fit my Suzuki liana perfectly sliding the wrap onto the wheel is quite difficult due to the wrap being very tight but that would be so the wrap doesn’t slide around after installed. The final result looks and feels amazing

The instructions were vague, but hey, it isn't rocket science. The cover was made of good materiel and it went on easily. Stitching it on was a breeze and when finished it looked like a professional job. I am very pleased with this product.