Why do I need to buy a non-slip bath mat? Comes with waterproof acrylic adhesive on the back, strong adhesion, no trace after tearing off, transparent, non-slip, waterproof, easy to tear and trouble-free, easy to install, three-dimensional surface texture, increase friction, don't worry about slipping, simple and make life better. Specification: Size: 19cm*12.5cm Color: Transparent Material: PEVA+Acrylic waterproof glue Style: S type, flower type How to Use? 1. Use a cleaning cloth, alcohol or detergent to clear the water and dirt on the ground 2. Tear off a part of the back adhesive and stick it on the ground, then tear off the other parts and stick it completely 3. Use a scraper to scrape out the air bubbles on the pasted patch, so that the non-slip paste fits together. Reminder: 1.The surface to be pasted must be a smooth, clean and dry surface. The surface that is too dirty or uneven or grainy or oily is not sticky and sticky. 2.You can use a hair dryer to heat and dry the product, which will help the product to be used for a long time. After sticking it, let it stand for 12 hours. Package List: 24*S-type non-slip stickers 12*Flower-shaped anti-slip sticker 1*Spatula 1*Instruction manual
H**
Great for prototyping
Great price for the items. Everything was included except a row of male header pins for the gnd connection in the fourth pin grouping.#Update : Turns out all the male header pins are attached at varying angles making it impossible to simply plug in the servo without another jumper cable in between or correcting the solder joints.##UPDATE 2 MakerHawk-US promplty contacted me to inquire about the issue and arranged for a replacement module. The replacement came with all of the components in proper alignment and completely intact. I would gladly buy again given the amazing price and fantastic follow up customer service.
E**T
Great product!
Was happy at how easy it was to setup and use the pca9685, with the two included servo motors . Prescale 0x79, Duty cycle -90:0.5ms:0x066, 0:1.5ms:0x132, 90:2.5ms:0x200, Period 20ms(50HZ), I2c addr: 0x80. Happy hacking.
T**Z
Works
I have this up and running on both a Raspberry pi 3 using Adafruit pca9685 package and a micro:bit using "MDriver PCA9685" in make code. No issues. You may have to do a bit of research to get this up on RPi, but there are good YouTube vids explaining it.
M**L
Terrible quality
The soldering of the headers is the worst I've ever seen and are sticking out in all directions. You have to squeeze them to even be able to fit a servo plug onto them and I'll have to rework them with hot air at some point or just get a new one.
J**Y
Nice tinkerer's tool!
Stable power in a small package.
R**.
Good product for multi servos
I'm a robot builder and arduino enthusiast and this module is just what I needed
Trustpilot
1 day ago
2 months ago
