Ender 3 Glass Plate Features: 1.It is acid and alkali resistant, high temperature resistance 400 OC. 2. The first layer has a hardness of 0.5H, which is easier to scratch, but does not affect the adhesion of the patterns. 3. The color will be changed after rubbing it repeatedly with alcohol, but it will not affect normal use. 4. It will increase the viscosity and absorb the oil capacity of the platform after being lightly cleaned with alcohol. 5.Please don't touch the platform repeatedly by hand to avoid severe sweating. 6. It is produced with special processing and will never appear on the glass, which is a good solution for the platform uneven problem. Instructions for Use: 1. Place the glass plate on the hot bed of the printer. 2. Put A4 sheet on the platform for leveling, and the distance between the nozzle and the platform can make the paper move freely. 3.Clean the platform surface with alcohol or water (if there is sweat or oil, it may cause stickiness.). The temperature of the heated bed can vary from different materials. 4.After printing, the viscosity of the platform will gradually decrease as the temperature drops. The model can be removed after lowering the platform temperature. Temperature settings for different filaments: PLA: 50-70oC Flexible filament: 50-70oC ABS: 100-125oC (110oCis recommended) PC: 100 -130oC (120oC is recommended) Nelon: 90-120oC (110oC is recommended) PP: 100-130oC (120oC is recommended) PETG: 50-70oC Specific: Material: special glass + microporous coatings Item size: 235 * 235 * 4mm weight: 707g Fit printers: ender 3, ender 3 pro, ender 3 v2 ect.
W**Y
A definite must have upgrade
My Creality Ender 3 v2 already came with a glass bed as standard and decided to buy another one as a spare. I have to say that using a glass bed is so much better compared to the other non-glass type plates that come with some other printers.I was originally borrowing my friend's Creality Ender 3 and that didn't have a glass bed and would sometimes have problems with adhesion etc.Since getting my new Creality Ender 3 v2 with a glass bed I've not had a single issue with the first layer sticking or similar issues so if you currently don't have a glass bed id 100% recommend getting one as it will make printing a whole lot better as well as help with less waste from adhesion problems.
E**E
Definitely fits a Ender 3 V2
Bought to replace my very warn out plate for my ender 3 v2, pretty much identical to the stock plate, but with a different logo. Very nicely packaged in a cardboard box with black foam.
H**N
Good
Great upgrade for my ender 3 pro. Had to buy clips to hold it in place but other that that great. Make sure you allow the print to cool down before you try to remove them.
J**S
Don’t clean with alcohol
After 1 clean with alcohol nothing sticks . It destroyed the surface 😭
C**E
Same as original ender 3 v2 bed
Same as the V2 ender 3, but different marking (it says Creality instead of having a dragon drawing). Good product.
M**D
Really good item
Really good item
S**F
Fast delivery great bond with filament
Had this a couple of month and would never go back by far best upgrade great fast delivery and great product
Trustpilot
3 days ago
3 weeks ago
