✨ Illuminate Your Drive with Style!
The iJDMTOY OEM Fog Bezel Fit 6-LED High Power LED Daytime Running Lights DRL Kit is a premium lighting solution designed for 2013-2016 Scion FR-S and Toyota FT86 models (excluding TRD edition). This kit replaces the original fog-less bezel panels with six high-power LED lights, each delivering 7.5W of output, ensuring both enhanced safety and a unique aesthetic upgrade for your vehicle.
B**Y
Great Product! My DIY Install with Low Profile Mini Fuse Tap!
Really nice quality LED DRL bezels. I'm not a very good DIY'er but with good instructions (or a lot of online research & youtube), I do well. However, the instructions on this product isn't the greatest, not enough to dock a star though because the product is really good. I did a little research and combined the knowledge that I acquired to do the install myself (local shop wanted $60 to install this). I used a combination of a YouTube video, some webpage (linked at bottom), and some forum posts to determine my strategy for the wiring and where I'd tap in to the 12v ACC/Ignition power. Most instructions I found said to tap into the power in the 12v charger adapter inside the glovebox. This would require you to have to go through the firewall and remove the glovebox to get to it. First off, didn't want to go through the firewall and secondly, the power wire seemed a little too short to reach (but apparently others have done it this way).DISCLAIMER: Here's how I installed this product. Follow it at your own risk/discretion. I'm not a pro and I'm not responsible if you choose to follow how I did it. This is meant to be helpful. If you are not comfortable with wiring or electrical, please have a professional install this for you!!!How I Installed these. Tools & Items needed.- Needle Nose Pliers to pull the fuses.- Wire Stripper / Crimper- Low Profile Mini Fuse Tap: Lumision FAST Shipping* ADD CIRCUIT BLADE STYLE APS ATT LOW PROFILE LP MINI FUSETAP FUSE TAP + 5AMP FUSE - Car Trim Pry Tools: Leegoal New Car Door Clip Panel Audio Video Dashboard Dismantle Kits Installer Pry Tool - Electrical Tape- Zip Ties- Dremel Tool- SharpieI used my trusty fuse light probe to determine which fuse in the engine bay's fuse box I can tap that would be a good candidate for the 12v ACC/Ignition fuse. Meaning, it would only be "on" when the key is either in the ACC/On position or the car is on and running. You don't want the lights to always be on and drain your battery. I found that the "IG2" (see my attached photo) was the one that worked for this! Plus it was positioned in a way that the wire would come right out the front of the fuse box, with some modifications.I used the Low Profile Mini Fuse Tap to plug in to that fuse slot. The 5AMP fuse worked for the LED DRL's, by the way. But after installing it, I had to cut my fuse box with a Dremel Tool and smooth out the cut. FYI, I used a cutting wheel to and sanding bit on my Dremel to cut then smooth-out the cut because I didn't want any sharp/rough edges to slowly wear away the wire. I first used a Sharpie to estimate where I needed to mark before I started the cut (see photo). I also had to cut off a little tab under the fuse box that was hitting the wire. After I made these modifications to the fuse box, I was good to go. I used the Trim Pry Tools to safely remove the original bezels, then wired everything up and installed them. I'm going to add some links below that helped me determine my strategy in installing these LED DRL's lights. After I installed everything, wired it all up, zip-tied the wires for good wire management and secured the control box, I tested everything and it works GREAT!! I've been up and running with this install for a month now without any issues. I also taped the hole up a bit with black electrical tape and taped up the crimped connection from the Fuse Tap to the Power Wire of these LEDs. Just to make sure everything stays nice and secure and weather-resistant.Here are some helpful resources that was beneficial to my install:http://store.ijdmtoy.com/Scion-FR-S-Install-LED-Daytime-Running-Lights-a/556.htmYouTube video (but he installed through the firewall and quick spliced to the power cable in the glove box):https://www.youtube.com/watch?v=19kW9Lzj6K4Overall great product. Tricky install for a novice but doable. Makes a big difference to modernize the look of your FRS!
A**R
Not worth the money
Waste of money. The drivers side did not fit correctly when I received them and I contacted the seller, but instead of sending me a replacement, they kept insisting that my installation was wrong, not their product. Now just 4 months after my purchase, the drivers side light has given out. I contacted the seller once again and it turns out that they only offer a 90 day warranty and mine just ran out. Don't buy these lights. They are cheap and will conveniently die right after the warranty is over.
B**R
OEM quality, easy install.
Good quality LED's, fairly painless install. You will have to do some wire management after you are done and, if you decide to connect the blue or white wires for the dimming and turn-off features, you will have to do some extra soldering, but its all pretty easy. They look KILLER with my Winjet HID headlights - they have LED runners on them too, very similar to the picture of the product. I also blacked out the blinker housings and put LED's in the blinkers too. If you get the right ones, they will be white light and on with your parking lights, and then change to amber when you use the turn signal. Gotten a lot of compliments on how mean my car looks driving behind you at night! These are a really cheap and easy way to add a lot of cool-factor to your FR-S.
P**R
Garbage, don't buy
Zero customer or product support. Had to purchase new relay from a different manufacturer after the supplied relay went bad and seller would not replace. Then a set of LEDs went out, contacted seller for help to replace the part and they will only sell me a complete new set. They don't get it. Don't buy, waste of money, garbage.
J**H
Great Look and Bright
I Bought these lights for my FRS. The Lights Look great with the car especially the limited edition FRS that has Xenon Headlights. Very bright and great in fog. Look great, works well high rating by my standards.
A**R
Installed with ease
Awesome product. Installed in about 15 minutes. There is a very simple way of connecting it. No need to go through firewall as instructed.
D**A
Disappointed
Did not bring everything for the installation of the car...... very freaking disappointed and mad I’m definitely getting my money back don’t recommend buying this.
E**O
Good produc and saller co.
Awesome easy to install great looking my car it's looking the best! !!! I would recommend very high level of profecinal by seller! !!.
Trustpilot
2 days ago
3 weeks ago