Haze Filament Quality 3D Printer PLA Plus Filament Purple Haze (Amazing Purple Color-Higher Heat)-1KG (2.2 LBS) Made in The USA 1.75 mm +/- 0.03 mm- Purple Haze PLA Plus 1.75

The color... wow! Selected by my 4-year-old who is very very pleased with initial results.I did some small temperature check prints and yeah, it needs to go hotter just like they say. It flowed fine at my regular PLA temp (215 then 210), but layer adhesion was terrible. Upped it 15 degrees and layers are adhering fine. Otherwise using my normal (pretty fast) PLA settings. Tested at 150 and 200um, great results. Printing on a Prusa i3 MK3 fwiw.Some comments mention packaging and moisture. While the vacuum bag around my spool wasn't very tight, it was sealed and had a small dessicant pack inside, and there haven't been any popping sounds when extruding.

This filament has a sparkly sheen to your printed project. Although your finished item is not translucent, it certainly does look cool. I printed a few figurines and designed them with a tiny hole in the lower back and inserted an LED into the hole, this filament carries the light very well up through your project and illuminates it. Prints very well, the diameter is very consistent and has very little stringing. It sticks to the bed good enough to print, but not so good that you destroy your print getting it off. I am anxious to try other colors by this manufacturer, as I am VERY pleased with this filament.

Came in a non vacuum sealed bag and failed to print anything with any quality

Love this stuff. Extremely cool looking and easy printing. I'm not one for lengthy reviews normally, but after reading other reviews I had to add one. I had a single under extrusion issue and it was 100% my fault( loose nozzle). I had no issues with quality or consistency. I printed with this on my ender and I printed with it on my plus with a (broken) cold bed. No issues on either machine. I planning getting another roll. If you have issues I'd recommend checking your machine, because this is great stuff

Wow! What a gorgeous filament! There is such beautiful sheen and depth to prints! This is PLA+ so keep that in mind when printing, it absolutely prefers higher temps. I print at 215-230. I do sometimes have extrusion issues with this filament, but they can mostly be mitigated by cranking up the heat. Start low and increase slowly like they say. Also, it is a bit stringier than just plain PLA. I love this stuff and I'm looking forward to trying the other COLORME3D filaments.

This filament is a beautiful, beautiful color. That gets it the 2-stars. I want to love this filament 5 stars' worth but it's not happening. My roll came previously-opened, apparently. Not vacuum sealed at all. It cracked three times while I was getting it ready to load up, and finally I reeled off a couple feet and got to some 'good' filament. Started print and it looked gorgeous for about 20 minutes, then cloggy/clumpy bad extrusion, etc... I played with temp from 195c to 235c to no avail, it looked like the sweet spot was around 220 on my printer. It was very stringy at this temp, almost like some petg''s, but I let it go. An hour or so later it was more or less printing, but not very well, then a bit later the filament smoked a bit, then I heard a crunchy sound as it broke and clogged the throat. (Or clogged the throat and then broke, whatever) Tore it down, wasted the print, cleaned up, new nozzle and throat, new ptfe, etc... restarted the print only to have the same thing happen twenty minutes later. I'm done. I guess now I know why this was returned the first time. I'll save the next person by just burning this roll I guess. Horrible experience with this stuff. I see other reviews with the same experience. Given the good reviews, it looks hit-or-miss whether you get a good roll. I loaded up some off-brand silky pink, just to make sure it wasn't my printer... and lo and behold I was back to printing smoothly again.

The color, strength and quality of this filament is great. However it seems to be wound quite poorly, as I have had a number of prints fail due to filament getting caught on itself. FWIW, my bag was vacuumed well, and the prints are great when I can get them to finish.Ender 3 - 220c

I have used about half a roll of this filament. I have had a few failed prints, but that was my error not issues of the filament. I print mainly tabletop gaming pieces and with this I printed larger pieces including a few decorative pieces that took over 10 hours with no problems. I am very pleased with this filament and am looking forward to ordering more colors from this brand!