VViViD Transparent Colorful Vinyl Window Tinting Sheets (1.49ft x 5ft, Blue)

I used this on my PC to match my iMac g3 monitor and give it the early 2000s transparent plastic look. Super easy to use, just make sure you figure out what side the adhesive backing is before cutting, I used tape to help peel it apart like the other reviews. Good price, it looks amazing exactly how I was hoping and does not reduce any airflow or increase temperature.

I used this tint to change loading lights on my tractor trailer from white to green. After watching a few how-to videos on YouTube and getting the swing of separating the clear backing from the colored tint product it was pretty straightforward and I'm happy with the product so far. Very happy actually. To separate the clear backing easily, dog ear one small corner and it's pretty easy then. Once separated, the side that had the clear backing on it is the side that goes against the glass. Be sure to get a beginners tint installation kit separately so you have the tools necessary for a smooth install. I didn't need water in my application, I just cleaned the lenses I was applying the tint to and applied it dry. In my case I was applying the tint over LED lights which don't throw off tons of heat but it was seemingly enough after an hour or so of the lights being on to activate the adhesive on the back. A single layer of the tint gave me a mint green hue with a hint of blue but I'm experimenting now with a double layer or light smoke film layer to achieve a deeper/darker green. All in all, I'm happy with the product and am just waiting now to see how it will weather, stand up to heat fading and hold up against power washers and the like. I'll update this review if any of the criteria I just mentioned fall short of my expectations. Update: 2 weeks later, I've added a second layer of tint and now the lights I covered give off a true green color that I'm much happier with. They've also stood up to several rain storms at 72mph and a truck wash at blue beacon which is 6 workers with power washers. I installed the tint on the OUTSIDE of the work light lenses on my truck so the weatherproof installation is pretty impressive. Last thing I'm waiting to see now is if there is any heat or UV fading of the color over time. I'll update again in a few months. So far, especially for the price, I'm pretty darned happy with the product other than the fact that it took 2 layers to achieve the emerald green color I wanted.

The good This tent is actually a darker purple then the light purple that you see around Amazon finally found a maker that makes dark purple tint and under a white light gives you an actual purple look instead of that pink look that the supposedly LEDs that they call Purple give Those LEDs that are advertised as purple are actually hot pink Using this tent with some $6000k or 6500k LED OR HID lights give you more of that actual purple your looking for. To get a violet purple / lavender purple look you probably will have to add some blue so maybe 8000k LEDs or HIDs will give you that look. That's the Exact look I'm aiming for The bad Not very sticky like most other tints Very thin and not thick like other color tints on here

Please dont bother with this film. The color is beautiful and I wish it worked - however when the package arrive it was already bent and I knew it wouldn’t work out. When I opened it, I realized the bent was not the least of my worries. Because it is so tightly wound, the creases from it being rolled up were difficult to get out as well. Adhesion was very difficult, and mind you I have our films up before and used the soap and water method always with wonderful outcomes. I tried my same tried and true with these, and it just did not work. Some reviews said there was a film to remove and I spent about 20 minutes trying to find it and peel it but to not avail. I could not find any kind of hint that there was one. This leads me to believe how with some reviews saying that there are and aren’t, product consistency may be an issue. I should have listened to my guy feeling about this. The most insulting part was having to roll the thing back up tightly to fit it into the tiny tube packaging they sent. It took four attempts because the stuff is so slippery. Send back for a return. The only positive that came out of this is that I found a local company here in Florida that I found an even higher quality film from and the quality shows. It’s like trying to compare proper window tint to a ziploc bag with the different in quality. Wish it could have worked but I’m overall glad it didn’t because I ended up finding local sources that were far better.

Absolutely love it!!! Mahalo! 🤙🏾😍😍

I bought one roll to see how the color works on the windows. Like it a lot and so I bought two more rolls. The color is way more vivid on the first role than the second two rolls I got. The second two rolls I got are not as deep of a red and a little bit orange. The first roll was amazing and has a deep blood red color to it. I still used the other two roles I got because I’m not gonna waste it. My boyfriend doesn’t notice the difference between the two colors, but I do. The second two rolls I got are like muted red. I almost thought for a minute they sent me pink by accident because the pink isn’t very Vivid either it just looks like light red. Application is easy if you do it right you need to make sure to take off the thin layer of plastic and really soak the glass with soapy, water and spray down the back where you took off the film before you put it on the window.I just use a credit card to get all of the bubbles and soap out.

Works great take your time it's not the easiest thing to do.. I got for my laser enclosure

As Described

Very clear to see through

Product quality it great ! However I feel as though they should advertise the full colour range of the tint, cause I was expecting something like the photos of just blue purple and pink hues, and I got the full colour of the rainbow Not mad about it, cause it’s cool but it doesn’t match my car (all blue) as I’d hoped

This is a vinyl wrap specifically meant for window tinting, not tail lights, or anything you want to stretch it around, a flat glass surface. The people complaining about a non adhesive side, no there is one, the protective film for the adhesive side is very thin and hard to separate. Once peeled the film isn’t very sticky until you add heat. A hair dryer does not work as well as a heat gun would. Warm water and a couple drops of soap in a spray bottle are a must.

Positively wasted my money on this “tint”. Not red at all, it’s PINK. But even if it was red like I ordered, you can’t see through it. It completely obscures your view, like looking through ice almost. Bottom line, it’s not worth it at all. First totally negative thing I’ve bought on Amazon.

Shipment was quick and the red is beautiful...it is sticky..you just need to cut a corner there is a clear backing..but its very thin..and plz note that this particular product will only work on glass