LAMPHUS Off-Road ATV UTV Light Bar Mounts Mounting Bracket Mini Bar Clamp Kits [0.75"/1"/1.25" Inch] [Vertical Bar] [Aluminium] [2 Unit] Bull Bar UTV Roll Bar Clamp Tube Roll Cage Clamps Mount

I used these mounts to replace a seat hinge on a Peace Motorsports Talon scooter. The mounts are more robust than the original cheap metal mounts. The mounts allow the seat to pivot, allowing access to the top of the engine. The mounts are well made and include all needed hardware. The rubber inserts allow use on multiple sizes of tubing, and when installed, they stay in place.

Easy to install and work great

I was searching for a suitable mount for Deanli Soundbomb horn to my Rocket 3 and stumbled upon this. I couldn't be happier with it. It's solidly built and still light weight. I had to put it together and take out several times to locate a suitable position on the bike for the horn. It still kept it shape at the holes and where the screw went in, tightened and came out several times. The included rubber teeth set is also of good quality. They grip well and do not destroy the paint. The Denali horn I mounted feels like more than 1 to 1.5 pound heavy. But this mount is still holding it well after several miles of ride on bumpy roads.For the price or otherwise, this is an outstanding selection. BTW, I had to reach out to he customer care and their services was excellent. Looked like they are based out of California. Highly recommended.

These are pretty beefy for the price, not the most perfect as far as finish. They look like they've spent some time in the parts bin, and just rattle around loose in the package when shipped. A few dings.The thing I don't care much for are the rubber spacers. The 3/4" are so darn tight that I had to use the screws without the lock washers, and then make a wedge between my triple tree and the handlebar to push against to get the screws to engage the holes. Took alot of fudging, pressure and prodding to get everything lined up so the screws don't strip. I'm sure with all that pressure, the screws won't ever come loose, even without loctite.If you use spacers that don't grip, what's the point?That's probably why some people say they are loose. Gotta squish the proper spacers into submission! It's just a battle to git 'er done!Got them to replace the lousy tin mounts that my Rockville RockNRide speakers will come with. Why do motorcycle speakers all come with mounts that look like they were meant for a cheap bicycle bell from the 1960's?Anyway, I'm happy with them at the price point. The few dings won't show with the speakers mounted, so I'll give them a 4. Just be mechanically adept. If you're not, forget it. I'm pretty good with my hands, and only said wtf once when I discovered how tight the spacers where.For a sturdy bracket on the cheap, I would definatly recommend them over the brackets that come with speakers or auxiliary lighting.

I bought this product to install auxiliary lights on a motorcycle. Unfortunately it was to thick to fit between fender and trim bar. So I'll be returning it. If I had an extra 1/4 inch clearance it would have been perfect.

I used this to make a side table to attach on the bar of my day bed. It worked perfectly! I like that the hole sizes are adjustable and come with different sized rubber rings to properly fit the bar its attaching on. I had to keep sizing up on the rubber ring to get it to fit! It was a tight squeeze and needed a lot of effort to get the screws to screws but it works and fits! If you put some weight onto the side table it does slip down, so just something to be aware of. But it was exactly what I was looking for and holds my drinks and food perfectly.

The product is nice looking, light weight, fits a multitude of bars, but my main issue is how easily the screws holding the two pieces together strip out when under minimal pressure. I tightened it down by alternating between the two screws until it was getting snug, and I tightened the bottom screw up until I thought it would hold tight without issue. After a 3/4 twist on the top screw (the longer piece of aluminum), it got tight and then stripped out rendering the piece useless. It was weird how the top piece stripped out with less pressure than on the bottom piece. The other bracket went in without issue. Well, I have to say customer service and getting a refund was a piece of cake. I sent an email to the vendor either on a Friday night or Saturday morning telling them I needed half of a new piece, and much to my surprise, I received an email on that Saturday. They stated they couldn’t ship out a new one due to the Coronavirus lockdown, but that they would refund my money and I could order a new one. My refund came immediately and I turned around and ordered a new set. While installing the new one I decided I needed to make a change to the other bracket that originally installed without issue. When I went to tighten it up again, the top screw on that set stripped out. Again, I did not tighten too much, it is just a lousy design to use such small screw threads on a piece of aluminum. Thankfully, when they sent me a new set, it was a pair so I still had an extra bracket (so much for using it on my kids quad for a spotlight). I don’t know why they can’t make this with a bigger screw or coarser thread so that it doesn’t strip so easily. I ended up using blue loctite on all the screws, but I was hesitant to tighten that last bracket down too much and I’m hoping it doesn’t move on me from vibration.I’d probably rate this item lower, but due to the excellent customer service and their willingness to back their product, I gave it a 3 star. The company itself gets 5 stars, they were great!

As advertised

Nice fit for my motorcycle handlebars and great quality.

Needed 1 to hold a light, works great doesnt move once tightened

Fitted my Stedi Floodlights to these great looking brackets. Couldn’t be happier.

Well made mounting brackets.

The 5 mm screw hole threads are not usable. I need to run a 5mm-0.8 tap through all the 4 screw holes to clean out the threads. The screw could not be threaded into hole otherwise. Also be prepared to get different screw lengths. The screws that came were 12 mm long. I tried to attach this to a 1 inch shaft by using the thinner spacer - the screws were too short - needed 20 mm length screws.Otherwise the produce is very sturdy