Specifications: Operating Voltage: DC 10V~30V Output Current: 0.5A~15A Frequency Range: 600-9500 Hz (MPU signal) Idle Speed Frequency: Adjustable from 30-85% of normal Speed Band: +/- 0.25% at steady state Temp. Stability: Between -40~+85 °C better than +/- 0.5% Remote Speed Adjustment Range (2 mode): Adjustable range +/- 5% with 5KΩ potentiometer Ramp Time: 3~20 sec. (Adjustable) Operation Environment: Operation Temperature : -40~+85 °C Storage Temperature : -40~+85 °C Relative Humidity : Max. 95% Vibration : 3Gs @ 100-2K Hz DIP Switch Description: SW1 : ON 600-1200 Hz SW2 : ON 1200-2500 Hz SW3 : ON 2500-5000 Hz SW4 : ON 5000-9500 Hz Governor Controls: DROOP : Droop Rate Adjustment GAIN : ACT Output Gain Adjustment INT. : Engine Stability Adjustment RAMP-TIME : Soft Start Adjustment SPEED : Speed Adjustment IDLE : Idle Speed Adjustment Dimension: 147 x 114 x 40mm Weight: 690g
B**X
Great replacement for a Barber Coleman governor control.
This was a perfect solution to our problem. The original Barber Coleman control had failed and this is advertised on the internet as a replacement for it. It's mounting footprint is exactly the same so I could use the original rubber vibration mounts. It has a setup and testing document with it which is all I needed. After dialing in the frequency range and adjusting the gain, it runs perfectly.This was used on a 600KW Kohler Generator with a Detroit Diesel engine, the MPU was factory installed on a driven gear(not the flywheel), and it was load bank tested to verify operation with block loads.I work for the City, so we had to purchase this from Amazon through a local vendor.
Trustpilot
2 weeks ago
2 months ago
