Mini Pan/Tilt Camera Platform Anti-Vibration Camera Mount w/ 2 Servos Aircraft FPV

Very nice i didnt know what to think of this but now i jave in hand and one my drone it work great for it simplicity but all in all very nice and quality product. I will buy another one.

One star because it arrived. Other than that one of the servos wires wasn’t even inside of servo. Never soldered never connected. It’s such a cheap item that when it’s not all working upon delivery ...it wastes my life to even return it. I’d rather pay more for one that came correctly working. So disappointed in the stupid waste of my life buying this pos. But really. Pick any ten with same pictures and product. You never really know. Amazon has to be loosing its ass on dumb returns. I’ve had so many lately. Chinese quality control has gone to crap. We need more American electronics company’s. At least we would make something that turns on.

Overall, this is a neat little tilt stand. It is on the small side (which was good for my application), and you're given more than enough mini screws to put everything together. There is some self-discovery as to which screws go where, but in the end, I don't think it really matters. The main downside to this stand is that the servo horns (the little plastic pieces you fit onto the tops of the servos) are incorrectly sized for the application. Provided you have some servo horns left over from a better servo manufacturer, though, you'll be fine (TIANKONGRC servos/horns fit perfectly). The servos provided are also just slightly bigger than other servos, so keep that in mind.Hope that helps somebody, and cheers!

Like most people said, there were no instructions and there were assembly problems. Only buy this if you like to tinker. You will need some kind of exacto knife or cutter to trim the servo "horns" to fit, a small phillips head screwdriver. Use a piece of cardboard to make some small spacers to place between the upper servo and its plastic mounting to reposition it slightly so the servo doesn't rub against the mount. (see the picture) It took me about an hour to assemble, but in the end it works. Good luck.

Servo burned out in seconds of use.Servo horns need a little love to fit. Super ez. On the short arm up top for tilt just use the smaller horn shaped like it. Cut off the end so the tip is at the mounting hole. I used scissors. Fast and trimmed a round edge. Then just go around the sides and the tip with a sanding block.Bottom one is the cross style. Just hit the side edges with sanding block and it slides in. Whole thing with fitting took maybe 30 minutes to assemble and never done one before. Looks decent for the money.

Id grade this a C- . Because the entire unit relies on bottom servo for rigidity expect a whole lot of shaking if mounted on a drone ! For durability Don't expect this to survive even a hard landing never mid a crash . Poor design has screws interfering with each other . I ended up just using CA to hold bottom servo in its bracket since like I said this is not going to last anyway . Its cheap but its worth even less

The short horn does not fit the side mounted top servo because the mount fits a 4-hole horn and the shortest horn provided with the servo is 5-hole.Side cutters clipping length and a light sanding and it works perfectly.Bottom mount, long horn fits perfectly as does the rest of the mount, works out to be a very solid build.9g servos are same as you get in the Arduino kits and work well although are built more for experimentation and prototyping than controlling heavy loads.For experimenting, they work great with ESP32-CAMs' and are a cheap introduction to servo control.They can be a lot of fun and endless entertainment if you can accept that they are not industrial equipment.For industrial use, go metal, for experimentation and scale, these are perfect.- Kent

The servo horns do not fit the base. You will need to trim them and they shatter very easy. The screw holes in the horn do not align with the screw holes in the base. I had to glue them in. After it is assembled the tilt mechanism does not sit squarely on the tilt mechanism. This is a cheep piece of crap not worth the money or the aggravation.