Fill N Save Elite Series Stainless Steel Reusable K Cup, Refillable Keurig Filter for Keurig 2.0 and 1.0. Excellent Filter Replacement to Coffee Pods. New 2018 Model, NOT for use with K55 Machines.

I had four of these total, but over the past few months, the piece of plastic on the lid which "authenticates" the pod on the Keuring 2.0 model always pops off over time. I'm not going to use super glue, I just have to be gentle with my last one until I find a suitable replacement.Great concept, but it needs more in the durability department.

I was initially excited to use this sturdy reusable k-cup, but I have had to stop using it. The problem is that the Keurig lid cannot close completely close. I tried as many things as I could to fix it, but couldn't find a solution. I made sure it was seated correctly (with the hinges toward the back), and I tried not filling the cup as full (at one point I only filled it halfway), I made sure that the lid was closed and sealed with the rubber ring. However, when I compare the lid closing on this reusable cup and a regular cup, there is as least a half a centimeter difference in how open the lid remains. Not only does this probably affect the machine (it does not belong to me), it also causes the coffee grounds and hot water to spill out of the part where the Keurig machine closes, causing a mess, as well as being dangerous.I cannot provide pictures, as I am not allowed to have my phone at work. However, I should mention that I have tried this stainless steel cup on two machines at work, and have had the same problem. When I noticed this, I compared the hinge to a plastic reusable cup that was at work ,and I do notice that it is bumpier.

This works well but one of the red plastic tabs on the top (that bypasses the laser verification) keeps popping off. I've had to fish it out of the garbage twice already. Without it, the Keurig will not allow this cup. If I lose the tab, I'm screwed. What a pain!

I thought I'd read through everything to make sure I was getting the right product. First thing in the bold print above only says, "doesn't fit K-55". Further down in the details, other models it does not fit: "K-55, K130 (B130),K145 (B145),K150 (B150), K155 (B155), K3000 (B3000)". But, look closely at the chart hidden among the pictures at the left, and right in the middle of, "yes-yes-yes-yes"...there's a model "A(70)" also marked, "B(70)...no". How did this not make it into the description copy where the other ones are more prominently displayed!Also, the sticker on the little box mine came in, said, "original Keurig 1.0 models"...but the only thing on the paper inside says, "works in Keurig 2.0 machines". Which may be true, but, if you're going to specifiy one thing, why blur it with not mentionig the other? In fact, that chart I finally found my model did not acommodate the product, is really confusing; did they really just want you to buy the wrong product that wouldn't fit, and expect you to be satisfied because you didn't find their needle in the haystack?I don't even know why this is designed to not fit, because the only problem is, the top won't close on the cup. Why? Because the sharp spigot that shoots the water in, comes down right in the middle of the cup; but, there are two holes in the top designed to acommodate that spigot, only both are a few millimeters off-center! On purpose! Who thought changing the pointy spigots would improve the design of the Keurig? Why would they do that! All I got was a flood of hot water and grounds all over the brewing area, and all over the counter.And the sad thing is, once I ran what was left over through two sifting screens...turned out to be a pretty good cup of fresh-ground brew. Missed it by THAT MUCH, guys!I started with two stars, because it's a pretty well-made-looking product, and technically it was my fault I didn't find the compatibility information buried over in left field of their ad. But no, I'm going to have to return it, disappoint my wife who keeps telling me k-cups are ecologically unsound, and AFTER I told her I solved the problem. And I assume the company doesn't offer a solution for the B-70, otherwise they would have already.And then I just noticed, in the last area of copy, where it mentions the other incompatible Keurig models, it also says, "always ships from USA". Well, that may be so, but the box mine came in says, "MADE in China". I don't mind being specific, but that's just a little fast and lose with your own integrity. Sorry, NO-star rating, even though I have to give it something to make the review go through.I am glad they honored their guarantee. Refunded, no hassle.

I bought 3 different kinds of reusable kcups, and this is my favorite. I’ve only used it a handful of times, but it makes the best tasting coffee of the 3. I have a Keurig 500 Series, and I have to pull the opening out a little bit, drop the cup in, and then the lid will close. If I just place the cup into the normal spot, the lid won’t close. I can see why people say it won’t work, and the lid won’t close, but with a little maneuvering, it does work great. The coffee is hotter than the plastic reusable cups. This is a good product. Very satisfied.

Don’t want to give up on it just yet, however, it doesn’t seal like it should. Coffee grounds are all over the place and it makes for a very frustrating 5am cup of coffee. I like the idea and my 2.0 doesn’t throw an oops every time i use it but i can’t get the grounds to stay in the pod and out of my cup. Might be requesting a refund if it doesn’t start working.

Exactly what I wanted but too small! For the strength of coffee I wanted, it doesn't work. I need to make two different cups with two different rounds of coffee

I am not sure if I was doing something wrong however, I had an original Keurig machine and this k-cup only leaked hot water everywhere anytime I used it. I was even convinced my machine was the issue and went and purchased the new Keurig K-Elite machine. I continued to have the exact same problem. At the price I ended up just throwing these in the trash and moving on.