The Dodge Ram 3rd Brake Light Cargo camera is specifically designed for select 2013-2018 Dodge Ram trucks. Included plug & play "T" harness will allow to connect the third brake light replacement cargo camera to a factory screen (no dealer programming necessary) and will work with the factory tailgate backup camera (truck must have a factory tailgate handle camera). The included switcher is designed to default to the factory camera input as per FMVSS standards. When the input trigger is activated via toggle switch or a trigger generator, the third brake light camera will display. The 3rd brake light rear-view camera will replace the original 3rd brake light. You will need to remove the factory Dodge 3rd brake light and then install the new 3rd brake light camera assembly in place of it. Power & Signal Connections: The 3rd brake camera includes a 23' composite video cable which will need to be routed around the headliner to the front of the truck in order to reach and connect to the aftermarket display. A 30" power/ground cable is supplied on the camera end to tap into power and ground at the reverse light. Specifications: Third Brake Light Rear-View Camera, Adjustable Camera for Optimized Viewing, 170 Degree Viewing Angle, Special plug and play "T" harness with switcher, Super CMOS technology provides a sharper picture day and night
G**R
Fairly easy install of a quality product but could use better instructions
This was a fairly easy install, but I found the instructions didn't give enough detail for my specific model. The included generic instructions, covered a wide range of installs, and kind of leaves it up to you to figure out where your power supply connections will come from. For me, on my Ram 2500, I tapped onto the red power wire feeding the heater/AC dash control panel. This took some testing with a multimeter to verify, but it all worked out. Links to a youtube video showing an install would be useful as well. I hunted around, and eventually found an install video of a similar product, that helped me.
T**
Emits low lighting and not a perfect fit
The camera is decent but what two things I dislike about the product are the actual bulbs they used, they emit almost no light, I had to install LED strips to the truck bed so I could actually see something in the dark through the camera and when I'm actually in the truck bed. The second issue I have is that it leaves to much of a gap once installed, I had to apply a good amount of silicone to assure no water egress would be possible. I wonder if the bulbs could be replaced??
D**S
Works great!
This is a great addition to the tailgate camera especially if you have a 5th wheel camper set up. The picture quality is excellent, and installation was not that hard. Would highly recommend this addition if you are looking to see inside the bed.
P**K
Will do
It’s ok just not very clear.
S**N
Black cable from light to video screen pushes together further than you think.
Use it for hooking 5th wheel hitch. Works great so far.
E**G
Easy install
Worked great
J**H
Was not broken
I received the unit have not had time to install this unit
B**Y
Everything worked
Everything worked as should. Camera will be perfect for loading a truck camper.
Trustpilot
1 month ago
1 week ago
