VLAND LED Headlights Fit for 2011 2012 2013 Jeep Grand Cherokee WK2, Front Light with Blue Dynamic Startup DRL, Chromed Housing

These head lights are bright and they match the black out theme of my jeep perfectly and not to mention the beam pattern is perfect and the installation easy due to it uses the same mounting points as my stock headlight mounts.

Installed on a 2019 GC Limited. Easy to install, but there are some steps that need to be performed before install. If you want the sequential turn signal or amber/blue colored LEDs, you will need to open the back of both headlights and remove the connectors associated with what you want (directions in install instruction handbook). Then you'll need to do some light mods to the fuse box in order to get the cable for the DRLs plugged in. I used a dremmel and made a small notch for the cable to fit through with the lid closed. Be prepared though - kind of a pain to align the lights since the knobs for adjusting are tight behind everything else. Suggest you connect and place where they will be and check against wall with tape at correct height before putting bumper back on your Jeep...

For the price, First impressions these are really well built compared to other offerings from other companies. I don’t know if they will have condensation issues or water leakage issues yet, but they seem built very well. Installation took me only about an hour. They are extremely bright lights with no fading or anything like that. The daytime running lights are also extremely bright bright. I would say just make sure you take the time to adjust them properly using the two slots underneath the hood on top of the headlight and I would go ahead and buy them. The only negative so far I found is the included wire tap for the fuse panel is not the correct size so you may need to go buy another or bend the pins to make it work. They are absolutely fantastic lights and I’m extremely happy with my purchase

UPDATE: I’m supposed to be getting a new controller box but now I’m told that it will not ship out until their holiday is over!! it’s been over two months since this whole ordeal started and I still don’t have a resolution. Since then, I’ve been looking on Google at the reviews and everybody complains about the exact same thing. QUALITY CONTROL! I’m also starting to see moisture inside the headlights. I read on Google that this is a common occurrence with these. Apparently you’re supposed to seal them before you put them on if you want this to not happen. I’ve decided as of today that I’m going to put my factory headlights back in and upgrade the LEDs. These things are absolute garbage and should be taken off of Amazon’s website. Just look at how many different companies are selling this exact same headlight! There are at least six of them that I counted. Same pictures same headlight. Save yourself the hassle that I’ve had to go through and skip this item. It’s trash. Thank God I got refunded for these! UPDATE: it is now been two months since my purchase and I installed very soon after they arrived. Both headlights now do not do the animation, unless I literally bang on them with my fist. I have to do both of them to get the blue light and animation to work. So the company sent me a new driver side headlight in the process of that light coming the passenger side headlight failed. So for whatever reason instead of sending me another new headlight, they sent me a “ controller box” from China and literally in an envelope! As soon as I opened it, I could hear rattling inside of it. Vland told me to open it up. They said that it was probably just loose screws I knew that it was not a loose screw because I could hear it and it was big. So I open it up and find a giant screw inside of it. That is not supposed to be there obviously. So the screw had rattled around from China to North Carolina and damaged all of the inside circuitry. So now I am still currently waiting on a replacement controller box for the one that came damaged and mysteriously with a giant screw that does not go with it. Absolutely zero quality control. At this point, I have no confidence whatsoever that the new headlight and control controller box is going to fix the problem for good. Also, ever since installing the headlights, I keep getting a warning light popping up, saying maintenance required on my automated cruise control/forward collision warning. Last night when I was driving it disabled it for about five seconds. I was told by my mechanic that it is definitely the headlights doing it. Next week, I will be putting the old headlights back in. There’s a reason why these only cost $400 people think about it. My original headlights are $2400 to replace. That’s because they move up and down and do all sorts of other things that these headlights don’t do. The only thing I can say that I like about these headlights is the brightness. They are mad bright! Especially with the high beam on it’s like the surface of the sun. Other than that, this whole experience has been a total nightmare. I don’t know whether I should try the new headlight and controller box when it shows up because it cost me $150 every time I changed the headlights out. My car you have to take the whole front bumper off to get the headlights out. A warning, you guys stay away from these lights. Think about it, what are the chances that both headlights do the exact same thing? Both of them I can bang on and make them work eventually. Both of them failed soon after installation. One about two weeks in and the other about three weeks in. They just continue to get worse and worse. I have to bang harder and harder. It’s just ridiculous. It’s not worth it just for some stupid animation that doesn’t work. Also, the company only responds in the middle of the night. I guess because they are in China. So if you wanna have a conversation with them, you have to stay up until midnight at least. Otherwise it’s you sending a message and then waiting until the next day to see their response. Then send another message and continue and it gets really annoying. I wish I had never bought these. I wish I had just bought some good LED lights to replace what was there. That’s exactly what I’m going to do now. You can see the picture of the controller box opened up with the screw that was inside of it. Obviously it does not belong there. Obviously there is no quality control whatsoever. UPDATE: so now the blue light and animation have quit working on the driver side headlight!! After many attempts and turning the car on and off it will finally work. Then it will continue to work over and over again….. and until you let it sit for a little while. Then it’s back to the same thing. These were professionally installed, so there are no loose wires and it’s not a fuse because if it was a fuse, it would not work at all. I’m going to check anyway anyways just to be sure. I have reached out to the company who has already compensated me for the scratched headlight and I’m awaiting a response. At this point, I want a new driver side headlight and a full refund because I am going to have to to pay for the installation again and it is not coming out of my pocket! I did get the beams adjusted so that I can see but the only problem is these lights are so bright that I get flashed constantly because people think my highbeams are on. That part I’m actually happy with that. I don’t really care about the people flashing me. I just want to be able to see and now I can. But the headlight malfunctioning is unacceptable and needs to be fixed. I will update my review based on what happens with the manufacturer. Today is August 24. Let’s see what happens. Original review: Don’t fall for the hype. These things are only good with the highbeams are on because of the light pattern on the passenger side you can’t see more than 100 feet in front of you. It does not even illuminate street signs! Also, my passenger side headlight came with some nice scratches on it after peeling off the protective film. I’m going to have to adjust the driver side headlight upward so that I can actually see. This will be misaligned, but at least I can see without the highbeams. The only thing I will say that’s good about these as the highbeams are incredibly bright. Like stupid bright. But the bean pattern on the driver side is absolutely terrible!!! And these are aligned properly by my mechanic. I’ve tried contacting the manufacturer and so far it’s complete silence from them. It doesn’t seem like they care. If I am contacted after this review, I will make changes and update, but as of now I am very upset and feel like I wasted all my money. I could see better with the LEDs I had in it before with the stock assembly. This is like a three hour job to put them in also. I’m thinking about taking them out and putting the stock set back in and just sending these back. What an unbelievable hassle that would be. Nightmare experience I suggest you do not buy these!!

They work & look perfect on our car. We ordered them but had professionals insert them as we have no experience doing it ourselves but the professionals had no problem or complaints installing them so I’d say they’re great for a cheaper & nice price. Got a lot of compliments on them. They do what they’re meant to do so I can’t complain.

These are really good headlights, and the service is great too!

On the Amazon page (as of the time of this review) it states that these are plug and play unless you have the factory xenon headlights. That is actually backwards. They are plug and play if you DO have the factory xenon headlights. If you have the factory halogen headlights then you WILL need the adapter to convert the connectors on the VLAND headlights (which are for xenon factory headlights) to the factory halogen headlight connectors. I didn’t have the adapter and needed this done today as my factory headlights were busted. Since I had LED headlights bulbs that had long leads going to the factory connector I simply cut off those connector tails and cut off the connectors from the VLAND headlights and spliced the connector tails to the tails of the VLAND headlights. The DRL connector on the VLAND headlights was not used. I didn’t install the ACC wire right away that keeps the “c” light DRL on when my headlights are off due to a time constraint on my end. I recommend running the ACC wire at the least while you have everything apart, even if you don’t plan to use it. Giving 4 stars due to the adapter issue.

Looks beautiful i have only one complaint that only one of my high beam do not work and i installed everything correctly not sure whats the deal with that but the lights are so bright i dont even use em honestly lol

No necesite ninguna modificacion tienen muy buena calidad y dan una apariencia muy diferente al jeep grand cherokee

La calidad es excelente, no tuve que hacer ninguna adaptación. Las luces led alumbran por mucho a las originales, Me sorprendió por el costo el producto que recibí.