SSL Satellites 80CM Zone 2 Freesat HDR Satellite Dish DIY Self Installation Kit, Latest Dish with Quad LNB, 30 Meter RG6 Black Coax Cable, All necessary Brackets, Bolts and SATELLITE FINDER

I had a poor signal and have replaced it with this bigger dish which has sorted the problem thanks but the only bad thing I could say about it was the connectors for coax that they supplied in kit just crumbled away when I tried doing them up luckily I had some.

Found this kit the ideal installation at the caravan to replace a rusty old dish battered by sea air.It was easy to assemble, the cable came already fitted with the connectors much more secure than self assembly.Setting the dish up was straightforward using the included satellite locator. The componentssupplied appear to be robust and capable of withstanding the seaside environment better than the previous dish.Now have a good quality,strong signal on the TV.

Very good does the job required to do

My Sky dish was looking rusty and the LNB cover was broken so got this to replace as I now use free sat. Not that easy to assemble and install but got there in the end. Hardest part was getting a signal, without the satellite finder would have probably still be trying but once it beeped it was easy to finalise. My signal is now near 100% and quality is 100% and the picture is much much better than it was. This week has been a great test with very high winds and lashings of rain but I have had no satellite drops at all so would absolutely recommend.

This dish worked great with my fresat box, but beware sat dishes are very hard to position as the angle has to be perfect. I managed to set this up by positioning it roughly based on my neighbours sky satellite position and the notches on the mounting bracket. There is a lot of paint on the notches, so they're easy to miss, but you really do need to use them as setting up can be extremely difficult with just a simple meter to guide you. Roughly lock the dish to the notches before you mount it. Allow at least an hour to position the dish as it can be very tricky to position and don't assume your cables are good if you have used twist on F-Connector plugs. Use satellite amalgamating tape to waterproof the plugs on the dish. Lastly check the signal strength on your sat box for each cable, you'll need one cable to watch a channel and a second cable to record another channel at the same time.

Wasn't impressed with the delivery as Hermes delivered it a week later than they were supposed too, (no blame to the supplier who despatched it the day I ordered it) however, this dish itself is decent quality and sturdy when assembled.It comes with a signal finder which is a very useful tool. The old dish that was on the house when we bought it was obviously a couple of cm's out of alignment so now the picture quality is much better and we have more channels.Overall I'd recommend this sat dish, particularly if you live in a zone 2 area like north Scotland as I do.

Decent quality, easy to install.

I suppose it will do what it says on the tin but the quality is rubbish. The F plugs split and did not connect to the LMB without a struggle. For a product that spends its entire life outside you would at least expect stainless screws. These were just bottom end steel screws with a coat of paint on. I doubt it wont be long before it starts to rust