Hayward FDXLBKP1930 Bezel and Keypad Assembly Replacement Kit for Hayward Universal H-Series Low Nox Pool Heater

Didn’t realize how bad our previous panel was until we got this one. Super easy to install and can now see everything again!

The keypad on my Dad's pool heater went out. The repair guy quoted an outrageous amount for the part from his central office. He was a good guy and suggested I do it myself and gave me a few tips.It can be a challenge to figure out which Amazon part matches the Hayward part sheet. I can confirm that this is in fact "29 FDXLBKP1930 Bezel and Keypad Assembly, Taupe". It is also a little unclear what you are getting. This is the keypad that attaches to the "28 IDXL2DB1930 Display Board Only" via two screws and a ribbon cable. In my case it was very easy to unscrew the display board, disconnect the ribbon cable, discard the old keypad, connect the ribbon cable to the new keypad and reattach the existing display board to the new keypad.The keypad comes with a fresh rubber gasket. I had to push it around a bit to get the holes in the gasket properly aligned with the holes in the keypad bezel. I had to use a lot of thumb pressure to line up the holes on the keypad and the heater housing while trying to screw in the retaining screws at the same time. Nothing cracked or warped and the new pad worked like a charm when I tried it.

My Keypad was damaged by the sun. The buttons on the display no longer functioned properly. The model replacement for my heater was no longer manufactured, but this unit is it's replacement. I performed the following steps to replace the display unit.It was easy and worked well.I turned off the powerRemoved the old display unit from the heater by removing the 4 associated screwsDisconnected the display from the backing PC board by disconnecting the ribbon cable connectorRemoved the PC board from the back of the old display unit by removing the associated screwsPlaced the PC board on the new display unit in the same placeRe-inserted and tightened the associated screws that hold the PC BoardRe-connected the display's ribbon cable to the PC BoardReattached the display unit to the heater using the associated screwsTurned on the Power - The worked fine, no issues!

Strange but the mounting holes didn't quite match up. Made me question whether it was the right product.

My Hayward pool/spa heater quit working. Had a pool guy come out to diagnose and he said I needed the new face plate (this purchase), a new display board AND a new control board and it would cost over $1,000 for the parts and labor. I just installed ONLY this replacement face plate and it took about 5 minutes (only need screwdriver to unscrew 4 screws on the outer part of heater) and VOILA! The heater fired up immediately. Recommend buying only this and doing it yourself before you pay for other parts and other pool services. Was so easy. I am very happy!!

I bought the plastic outer panel and the Hayward display board that was showing the CE error message and another part (Hayward FDXLICB1930 FD Integrated Control Board Replacement Kit for Select H-Series Pool Heater) which I didn’t need $185.00. All I can tell you is it took me 10 minuets and that includes the time walking to the fridge to grab a beer. Great vendor, great service, fair price and I’m up and running. Thank you to the previous buyers with their posts, pictures and advice. Turn the power off, take a few pictures but it’s very simple. I hope this helps

The product does not have Hayward written on the front like the product description contains. Several other reviewers noted the same thing.I have included a picture of my old keypad showing the Hayward logo on my old keypad circled in green along with the product I got with the area where the Hayward logo should appear circled in red.

Original Hayward part. Thought the wire was too short at first but then realized I had to just unscrew the board assembly and unplug the wire to replace the beat up faceplate. This is the second faceplate I've replaced in about 5 years and the buttons stopped working. Desert weather tears these up pretty badly but easily replaceable.

Easy to install. Excellent product. 2 minutes to install.

Fit my heater (Hayward H250FDN) perfectly and brought keypad functionality back. Feel of the membrane switches is solid and construction quality appears good. Hopefully will last several years, but for now 5 stars as perfect OEM replacement.Note - this is the keypad only and not the control panel board that it connects to - exactly as pictures shown.

Worked well. Fit the unit perfectly.

Arrived as promised and fits perfectly on my Hayward 300.

The keypad assembly was easy to install and works perfectly. I am very happy with it. Thank you very much amazon. Floyd.