True Mods 49 Inch Smoked Triple 3 Row LED Tailgate Light Bar Strip for Pickup Truck Trailer Vehicle [Rigid Aluminum] Amber Sequential Turn Signal TBT Red Running Brake White Reverse Tail Gate Lightbar

Looks great! Works as it should. Easy installation, although I had to screw mine on because the adhesive wouldn't stick to the bed liner material, but I expected that before I ordered it. I used a 7 Pin to 4 Pin USCAR Trailer Extension Wire Connector Adapter to wire it up so it did not interfere with my trailer sensing on my 2024 Ram. I like how its invisible on my black truck until I turn on my lights or hit the brakes. Very satisfied!!! 5 star!!!!

This is a plug and play item with minimal hardwire connections for the reverse light option. However, I didn’t want to see any 4-way flat wire showing, so I decided for a full hardwire connection. It took some thinking to figure out the correct wire to link it to, but the end result was much better. To sum up, this product looks great 👦🏻👍🏻!

The mounting of the light bar was the easy part. I strongly suggest that you take the time to remove the tailgate so you can access the area where the light bar will be mounted to properly and thoroughly clean the surface. This will permit the adhesive to have a solid clean surface to grip.To ensure the wiring would be protected I measured the wires that needed to run from the light bar to both taillights and laid them out like a wiring harness. I was then able to test the harness while it was laying on the tailgate. When the harness passed testing I placed it in a split tubing and ran that under the vehicle and secured it with zip-ties. Finally I made the connections permanent.I am very happy with the look and performance of this light bar.

Okay Look! I've been using these pretty much since they first came out! Easy to wire especially if you have a trailer pulling ability already wired into place to tap into. I like to use the clips to screw down over mine because I actually had one pried off my bumper and taken. Yes, they are that cool to have that some will steal it. Because I have had them before, I can replace mine easily because all I need to do is remove the old one and plug the new one into where the old one was wired. I replace mine every 3 to 5 years when they become too cloudy and the light is obscured badly. I actually have two in place. One facing back out on my bumper and another one facing down towards the ground under my bumper. They both together prove a lot of light when connecting up a trailer to the hitch..

I use this light bar because my bikes block brake lights and signal lights when they are on the bike rack. I have researched actual light bars made for bike racks, but they all run in the $150-$200 range. This light bar works beautifully. I like that it is firm, and not flexible. It is very bright, and when I zip tie it to my bikes, it is stable. The only issue, as I noticed, and also see mentioned in other comments, is the connection where the light connects to the wire is weak. Also, the 4 pin connector is not long enough to reach my connector on my car, so I also ordered the 59 inch 4 pin trailor wire extension. That allows me to connect the light without putting tension on the weak connection point. I just wrap the excess around my bike rack. I have traveled with my bike, and hit rain. The light continues to work. And I feel very safe with my bikes on the rack, knowing my driving intentions are very well displayed. I have had this light bar since May 2023, and use it just about every weekend, and as I mentioned earlier, took a few trips with it. BTW, I also ordered the reusable zip ties. This allows me to put them on and take them off the light bar easily. I wrap 4 around the bike and light bar that keeps it snug, and secure. For any of my fellow bike riders looking for an affordable alternative to a"bike light bar", I hope this helps.

I spent about a day and a half trying to install this so called plug and play product. The written instructions was vague about the installation process so I went on YouTube to try to find this product and could not find it. Watched to numerous videos of our products and the installation process was all over the place with splicing wires, wiring the backup light function to a wire connection thru the brake/backup light assembly on my truck. Most of the instructors were from the auto repair industry and all of them complained that the manufacturers guidance of how to properly install their light bars was not that informative. I tried to call TrueMods, the product manufacturer and no real answer just some BS about being under staff. Went to the website and found a help tab and started to mentioned the issues I was having but no real help. So what I got to work on the unit is the right & left turn signs and the back up light. As for the brake light function its not working.In addition, what's really disturbing is that I'm getting messages on my display screen saying "a trailer is connected to the vehicle" and then its disconnected to the vehicle. I'm concerned this product is sending mixed indicators to the on board computer and now I'm concerned with a vehicle malfunction.This company needs to produce a YouTube video of how to install their light bar product.BIG DISAPPOINTMENT AND A LET DOWN BY NOT HAVING THE PROPER SUPPORT. IF I COULD UNINSTALL THIS PRODUCT AND SEND IT BACK I WOULD.