HellaH4P50TB +50 Performance Bulb, 12V, 60/55W, 2 Count (Pack of 1)

These bulbs were under 4$ ive bought a lot of 50$ sets of bulbs so let's agree to not compare apples to orange. Stick to the 4$ here. I installed these on a 2006 prius after one burned out last summer. They are good lights brightness is good, color is like stock, life just a little over a year and one of them burned out. Again 4$ so of coarse i ordered 2 more sets and just put them in the glove box. Usually i replace both at once. But for the sake of seeing how long the other one lasts i only replaced the burnt out one this time. We are at about 15 months now so working. Are your bulbs easy to change? Yes, Order 2 sets. Keep them in your glove box and save some money.

These are good bulbs and the pricing was very reasonable. I have gone up dramatically since I bought mine. But they are great value for the money I paid.

They fit, they work and they have lasted quite awhile. The price was right.

Halogen bulb installation is routine for any car person. On the CRV it's easier to remove the headlamps to do it. YMMV. They were brighter than the 20+ year old (can you believe it?!?) OEM bulbs but I was hoping for more brightness. Still, they work fine and if I had to do it again, I would get the Hella 2.0 'super bright' bulbs. But, those are ~$28 and these were ~$8. Hard to pass up at that price point.

This bulb was right on fit exactly as it should have. And I know that German autos come with hella so that's why I used it not that German cars are quality autos anymore but you get it. Hella means quality to me. Shipping packages were good and well protecting the bulbs thank you

Instructions for the 2005 Tacoma (20-30 min job). Having a flashlight may help depending on lighting conditions. Materials needed: paper towels, contactor spray, disposable gloves, new bulbs, and long narrow screwdriver and 10mm socket/ratchet are optional. Perform driver's side first since there is better access and knowing the procedure will help on the passenger side. Alternatively, remove the windshield washer fluid reservoir (two 10mm bolts) on the passenger side to provide unobstructed access to the passenger side bulb:1. Remove the bulb connector by pulling straight back (no clips here) and set aside out of the way. In my case, the connectors were greasy. So, either wear disposable gloves or clean them first.2. Remove the round black weather boot by pulling on the tabs. A screwdriver may help, just be careful not to pierce the rubber.3. There is a bulb retaining clip (similar to a paperclip) that is hinged on one side and hooked on the other. Simply press on the hooked side and lift using a single finger and the retainer will swing open like a door. Observe orientation of the old bulb before removing and then pull it straight out.4. Install the new bulb, reattach the retaining clip making sure it hooks completely (a narrow screwdriver may be required).5. Reinstall the weather boot making sure it seats all the way around to avoid moisture entering the headlight.6. If you have electrical contact spray, spray that onto the connector contacts (in my case, corrosion was apparent) before reonnecting to the bulb.7. Repeat process on other side and then test hi and lo beam functions and you should be all set. Dealerships charge about $120 per bulb change. So, treat yourself to a beer with the savings🙂

You cant beat these old school bulbs.You get 2 for the price of 1 and there bright bulbs.The installation of the bulb went as smooth as possible and my new bulb was working,the hood was shut and I was done in 1 minute tops.But it probably will take longer for your average DiY "Shadetree mechanic,"being that I'm a certified mechanic with over 25 years in the biz and have done bulb swaps 1000's of time to say the least,of coarse helped me with my speedy time,which I was shooting for.Its a simple fix anybody could do there self in under 5 minutes,no need getting help.YOU CAN DO IT!

There is no room to complain at the price point for these light bulbs. They have form, fit, and function. My application is for a 2008 Toyota Tacoma.