Vongrasig Outdoor Storage Shed, 6 x 4 FT Outside Metal Garden Shed with Large Window and Lockable Door, Waterproof Tool Shed for Backyard Patio, Lawn and Garden (Gray)

Great sged. Directions were not the best but we figured it out. Did take 2 days to finish it. Best if you have two people also.

Perfect for storage yard equipment and sturdy material but you do have to build and that was a pain.

The listed base dimensions were correct, and there are going to be some dents and bends but all the panels and holes lined up. I screwed the base rails down to my pressure treated plywood and 2x base with some Simpson tie screws. Going thru the assembly manual you'll find parts that can be pre-assembled prior to putting the building together. This is a good start of the building process and less time spent on the building day. The eight piece base becomes four, the eight piece roof beams becomes three, and the two doors start with 18 pieces. There are a couple other things to put together but they are minor. The plastic washers come in moulded sheets and have to be cut out. Cut them out and pre-install them on a couple hundred screws. These nibs left on the washers and the metal panels can cut you very easily. The kit came with two pairs of gloves. It was so hot out I didn't wear them so I had sweat everywhere and some blood. It is very easy to strip the screw holes out, if you use a power tool to drive screws, just use it to start the screws and finish tightening them by hand, even on the lowest torque setting of a screw gun the screws stripped out. Tight is the screw making contact and then maybe and 1/8 turn. If you strip the screw hole, you can remove the screw and hammer the hole closed enough with a hammer and a metal backer on the other side. The ends of the roof panels and the tops of the side walls get screwed into an aluminum slot, here I was able to use the screw gun on a number three setting. Some of the pictures in the manual don't clearly show the orientation of the part. This was mainly the upper front and rear wall bars that get put together with plastic pieces. So you have to look at the holes in the bars and think where the wall panels and roof panels go. This is where the manufacturer could improve the manual and also these parts. There are no screws holding these 18 pieces together so they can come apart on you before the sides and/or roof keeps these together, plus they are wobbly as it's not a tight fit. The building is very flimsy until it is all together so I used some ladders to stabilize the front and back of the shed so a gust of wind wouldn't bend the panels. I put the roof panels on from a ladder inside the building, you can do both sides at the same time, until the last two on each side, where upon I worked from the rear outside. Assembly time for me alone was 6+ hours. I don't recall the pre-assembly time, probably 2-4 hours. But it was nice to get to the door portion of the manual and all you do is install them instead of assemble them. I remember decades ago putting one of these buildings together with a few 'helpers'. They were grabbing panels and installing them in the wrong place, so as the manual states, lay out the parts and get familiar with the parts and assembly.

Do not purchase. I ordered and then started to read the reviews. I tried to cancel within an hour of placing order and was not able to cancel. Now I am trying to return via Amazon and they show that I have to go directly to the supplier and what until they refund my money for the purchase. Plus I have to pay for the return shipping. This is the worst purchase I have ever made with Amazon. Beware DO NOT BUY THIS PRODUCT. All of the bad reviews are true. Quality is poor. Instructions are useless and the size is outside dimensions not inside dimensions. Off by 1/2 a foot on with because they take the overhang of the roof as the outside dimension. Bad Purchase and Amazon is not help has of yet to get my money back.

If I had paid more than $300 for this, I'd drop it to two stars. That being said, this has been exactly as other reviewers have said. Pros: cost effective storage and it's dimensions are accurate. The panels were packed pretty well and the protective plastic film helped protect from scratching. So far all the holes have been aligned and it's all labeled well. Now for cons: this is a two person assembly. Carve a few hours out of your day because there's a LOT of assembly. Some of the steps are unclear and we had to unscrew/fix positions of parts. The film is a pro and a con. Removing this film is aggravating and adds to the assembly time. Several of our panels were pretty banged up and dented upon arrival, so we made sure those will be in the back. All in all, you're not getting a bad shed for the price

Great little shed. Best with some sort of cover over it. The roof is thin metal and would definitely get dented from a fat cat walking on it or hail. I have it in my carport for storage of lawn equipment, mower, weed trimmer... Assembly is indeed quite difficult. Recommend to ask the seller for an installation video.

Easy for myself to put together without my husband. Holds alignment. Great protection. The door opens and closes just fine

Is what is says it is! The door is a bit shorter than expected, but that has more to do with me reading the details, I keep banging my head. It looks great, mine didn't have any major bending around the edges from shipping, they even had wood boards around the edges of the package to help protect it. Instructions were a-la-Ikea... not fantastic, but I got it sorted. Tons of extra screws, which was great because I dropped some in the grass. I've got solar panels on the roof of mine, but no leaks so far! Would recommend for a small storage shed.