M DripKit Drip Irrigation Garden Watering 150 Plants Drip Kit

In description it is written the that Main Supply Water pipe is 16mm but the item received in 10mm. So it will be impossible to connect this 10mm pipe to Elbow , T-Jointer, and Straight Connecter. Even in T-Jointer it is written 16mm so in no way you can connect provided 10mm Main Supply Pipe. Although product quality looks good.Have Asked for Replace, hope they provide correct item next time.

Works good. But by incorporating a few suggestions, it can be made great.1. Pressing the feeder hose connector into the drip hose was hard on fingers, even after punching a hole using the provided tool. After a few your finger goes numb. Instead a simple, small plastic tool to press it down into the drip hose would have been good. I ended up using the cutting-plier spread around the vertical projection and pressing on both the horizontal projections. But one slip would break the vertical connector and that would go waste.I would have designed a plastic tool with a hole at the center for tis purpose.2. When someone has large pots (like those used in terrace gardening) it would be good to take one feeder hose to each end of the pot and use small Ts on feeder pipes to further split it into plants in the surroundings. pulling a feeder hose from drip hose for each individual plant in a large pot is too cumbersome.3. Same situation as in #2 where there are a many small plants in a large pot. The drip endings could have more holes to kind of sprinkle in a small area of say 1 foot. then small plants (like chilli plants) in 1 foot area can be watered using one feeder hose. I ended up remove the front of the final dripper, place the dipper facing upward (!) and attach a small, hard piece at the top to spread the water around.Otherwise, the kit itself is very good.

The packet does not include items as per the bill of material. Main pipe as well as branch pipes are much less in length. Main pipe is only 16 m, did not check the branch. Items like water tap adaptor is missing, most of the numbers of the fittings are almost half of the mentioned except emitters. There is no clear instructions for installation. Disappointed.

Very useful. I installed it in my garden myself. The quality of the plastic is average. Pipe quality is good.

Great DIY Drip kit with more than enough components to cover my large balcony! Very good quality and working flawlessly since last several months. Only issue is it takes superhuman strength to insert the feeder pipe connector to supply line! A tool for that would really help, although I made my own - a simple strip with hole to distribute the pressure.

The feeder line pipes are not of uniform diameter. Until some length it is proper later it is bigger in diameter. Hence it cannot hold either the drip emitter or the feeder to main line connector. So water leakage will be more during irrigation. If you are using this setup for land irrigation then its okay. My case I am using for kitchen gardening where in I am in 2nd floor and I am having 3 portico and I am using 2 of them for gardening. Your neighbor especially the one who stays one level below should not create any problem because of water leakage. Otherwise the product is okay for use. It serves its purpose. The quality of all the plastic materials can be improved. Especially all the connectors.,

I brought this product for my 14 Cent plot which has coconut trees,Areca trees and banana trees in my plot in kerala. It liked it , very easy to install as I did myself in 2-3 hrs. Since my water tank had good height , I directly connected to a tap without any pump. I did not purchase regulator. For coconut trees I provided 3-4 drips. The 16MM main hose was not enough for me and I had to order another 25 M. 15 min was good enough if you are irrigating 2 times a day.

The media could not be loaded.  The best product ever. Took a but of time to install but once done it's fantastic. Attached are the images.Just a thing that sometimes there may be a few drops of leakage at the point where the main hose connects to drip hose. So position the connector at the mid of the pots for zero leakage.I have now installed 40 pots for nowThis is so good that I have now ordered another kit.