07-16 JK 50''E/SR BROW

Very well made unit , just keep in mind this does not fit every 50" inch like bar make sure the light bar is like 52"inchesThis is def made for rigid industries light bar

UPDATE 07/05/2015 If I could take away the 1 star I gave them I would. I just returned this product and the Rigid light bar opting to go with nothing as opposed to the damaged and lazily fabricated mount. Apparently with these mounts the only way installers recommend using them is if you utilize zip ties to hold the wires to the mount/A-Pillar. Want to talk about cheesy? I just assume not have a light bar and mount than use zip ties. Embarrassing.I have to unequivocally state that this is the biggest piece of $200 garbage I have ever bought. You want to talk about lazy fabrication? Check this product out. In Rigid's infinite wisdom the decided that they were not going to leave you enough room to run the wire (from the harness THEY sell) behind the A pillar mount. If you do manage to fit it behind their you realize quickly that your hex bolts aren't long enough. One would think Rigid would have some sort of guidance right? Wrong. There response is merely, "we do not do installs so we can't give you any guidance." A company that doesn't tell their customers how to properly install THEIR product? You have got to be kidding me. The instructions say I should have received compression spacers. Of course I did not get any. Not to mention when received the black powder coat was chipped and damaged. Long story short, this product stinks, their customer service stinks even worse, and if it wasn't such a pain in the butt to send these back and order a different pair, I would. Do yourself a favor and stay away from Rigid.

Great construction, great packaging.PROs: Thick, sturdy steel construction. Great finish. Holds 50" LED light with ease.CONs: When used to mount the 50" LED light should have included a wire loom or something to secure the wire. Just seems like it's an unfinished thought.

They are built strong. But I had a difficult time installing them. Mostly user error. But they were more difficult than they should have been. If you have side window light brackets such as KC, you will need to put those on top of the rigid bracket. I could not reinstall the KC brackets because the bolts were too short to get though both brackets. Even without the additional KC bracket, some of the bolts were still too short. Rigid does not supply longer bolts. Off to Home Depot. After I got my new bolts I then had a problem lining the holes up exactly. I ended up strippin a nut in the chassis. I was fortunate enough to get a wrench in through a crack and with some luck was able to attach a new nut. I only had this problem on the passenger side. Driver side went on smooth as butter. So maybe the bracket or the jeep was off spec by a millimeter or so. But I'm convinced it's the bracket because the bolts never aligned perfectly and had to be somewhat forced in as opposed to simply screwed in.. Then there is the rubber that goes between the bracket and the A-Pillar. Rigid could have at least cut it to the correct dimensions as the bracket. I had to cut the rubber insert to size. Otherwise it would be seen sticking out from under the bracket. Oh and one bracket came with what I can only describe as little Knicks going up the side of the bracket where the machine that cut the bracket may have been miscalibrated. But its not noticeable so Im letting that go.But for all these issues I knocked off 2 stars. Don't get me wrong rigid industries makes some of the best lights and is considered top of the line. These brackets are pretty well made. But no hardware, inperfections in the bracket, rubber insert not cut to correct dimensions, and what I believe a misalignmeet of the holes on the passenger bracket. I think 3 stars is generous considering all this. I probably should have returned them but I really wanted my rigid lights installed and didn't want to wait. Overall they do the job and in the end look pretty good, and that's all I wanted. Another option to consider is Poison Spyder.

A good mount, bought to use w/ OEM Rigid 50" E2 light bar on 2014 Wrangler Rubicon JK. The power cord of the Rigid light bar DOES NOT fit under the mounting bracket. I've fabricated a ton of things on my jeep and other cars - this isn't user error, the mount literally doesn't fit a power cord under it anymore, contrary to what people have said online about this mount for prior years. Also, the bracket screw holes don't line up well w/ the Jeep factory screw holes, making it seem like it won't work at all until the very last second when you tighten it all down. It looks good and is sturdy once mounted to vehicle though.

Perfect fit with a good powder coat finish. It was VERY well protected from getting scratched up while shipping.The included rubber liners are nice, and should protect the body should I remove the mount. If you plan on running a set of lights on the A-Pillar, you'll need longer screws...but that's an entirely different situation.Overall I'm very happy with this mount!

JK owners - Don't be cheap. Buy this mount if you are planning on running a 50" LED light bar. I know this one costs a bit more than a Rugged Ridge or a Made in China brand - but seriously - You won't regret it. I bought the cheap Chinese imitation - what a piece of junk. Has a huge gap at the top of the windshield - looked awful. This Rigid version was designed to eliminate that gap and provide a much more sturdy mounting solution. It comes powder coated black. If you want to put up a pair of Dually spotlights, you will need an additional mount for them. I recommend the Poison Spyder mounts. They work perfect together.

Product was a recall part and had to get manufacture to send replacement part. The holes did not match up.