Tool Daily Stainless Steel Fixed Sewer Jet Nozzle, Button Nose 3/8'' NPT Female 4.0 Orifice, 4000 PSI (3/8 Inch)

Jet head works great at 4000 psi

I had bought this to replace the one on a hose I had that didn't have a center jet. I had ordered the hose and this tip at the same time so when they came in I found that the hoses tip was not replaceable. As cheap as it was I saw no need to ship it back, so it goes in the scrap/spare/odds and ends can. Who knows, I might find a use for it someday.

Have used this adapter head a few hundred times since I purchased it over a month ago. So far it has done its job very well in very many nasty situations . could not ask for a better functioning tool for the price .

It fit the hose I purchased to convert my pressure washer to a jet.

I would suggest opening the rear facing jetter holes and opening them up just a bit more with a very small drill bit. This might depend on water pressure if you do this results could very. We use booster pumps were I use this. Bigger openings help it pull way from me easier.

Cleared a very plugged shop drain that was about 10”x 8” full of sludge up to the grate and went under about 20’ stretch of concrete to the sump, that’s the area that I needed to clear. It took about 3 hours but I got it cleared and the drain works now.

This jetter worked fantastic. I have a great power wash, 4500 PSI with 50 feet of 1/2 inch line. It was easy to work the jetter upstream from my clean out. 15 minutes later the drain was clean. Save a ton of money on a plumber.

The product is entirely to small for what I needed it for.

worked great

Took more than a few days of reaming this thing in and out of the field pipes but saved thousands of $$ by not having to replace the septic field after finding that the outflow pipe had broken off inside the tank. Used this nozzle on a 2000 PSI electric pressure washer plus a 100' length of sewer-jet hose; definitely would have worked better/faster with less hose and more pressure (use a gas washer if you can) but it did the job. I would have liked more of a solid cone of water jetting out of the nozzle, rather than the individual jets from this nozzle, but again, more pressure (and less hose) would have compensated. It worked, that's the most important part.

Fait le travail

Used it and it worked great.Make sure you have enough flow for it.

Had to make the forward facing hole slightly larger but other then that worked great