Compatible for OnePlus 12 Screen Protector, [Auto-Dispersion Tech] Full Coverage Hide Scratches Fingerprint Support Bubble-Free Tempered Glass for OnePlus 12-3 Pack

Ok. So this is the best screen protector for the OnePlus12. Don't get suckered by the so-called "full" adhesive ones. That just means there is a full amount of adhesive around the perimeter of the screen protector. There will be no adhesive on the center. So if you are looking for a glass screen protector, this is your best option.Follow the instructions on the video found by scanning the QR code included in the pamphlet. They are pretty straight forward and will show exactly how the system works. I have used the kind of protector before, from another brand. This one works just like that one. I would caution, once you pull the protective plastic from the back of the screen protector before installation, make sure you don't get a fingerprint on it. The adhesive will not want to stick where your skin oils touched and you will have a small patch of bubbles. Ask me how I know. I would probably wear nitrile gloves before installing another one. I was able to work the bubbles out by carefully pressing the area and then releasing. It looks ok now and is not noticable under normal light, however, not an ideal situation.After curing with the supplied UV light for the first 90 second cure, I pulled the phone from the cradle and wiped the edges clean with the supplied micro fiber cloth. I was careful not to press the protector, just to remove any excess adhesive that ran over the edges. I then did the 60 second edge cure and wiped down the groove where the glass and the case meet. I was much more aggressive this time, making sure to remove all the excess adhesive from the groove and wiping it all clean. Afterwards, I did another 60 seconds of curing, holding the phone edge so that the light was able to cure the edge perfectly. So now I am typing this on the very phone that I applied the protector to. Everything works. I really didn't need to re-do the fingerprint scanner, it works just like it did before. The one thing I have noticed is that the keyboard seems to lag slightly. However, the more I type on it, the more I have become a customer to that. It might just be perception, as it actually seems very sensitive. The only recommendation would be that the protector doesn't seem as "oliopbobic" as other protectors I have used. Maybe I can get a liquid application to improve that. So, this is the one. Yep, it's a lot more expensive than others. Just bite the bullet and order it. You do get 3 protectors in the kit.

First I want to mention the passive aggressive marketing displayed on the box of this product. It says, 99.99% of the failed attempts are due to not watching the instructional video. Essentially they are calling everybody who has had a bad experience with their product idiots. I thought it was funny at first, thought differently later and I'll explain why. I opened the box, inspected the components to their screen protector installation kit. Everything looked top notch, however the guide included was not for my phone, but it fit so I didn't care. I loaded up YouTube and watched the video twice. Looked easy enough. I prepped my phone according to their instructions and set out to apply their screen protector. The first attempt went horribly as my table has a slight tilt which caused the glue to run close to one side of the screen than the other and caused the glue not to spread where it should have. So I peeled it off, cleaned off the phone (which I might add, please use the included button cover stickers because this glue gets everywhere), and tried again. Same process, cleaned off the phone, applied the glue and instantly saw something troubling. There was dirt or something in the glue, and I know it was in the glue because I squeezed the tube slightly and looked into the glue ball that was forming at the tip and there it was, specks of dust or some other foreign matter. After that I threw the whole kit away and swore off this kit as a complete waste of money. Wouldn't be so bad if it was about half the price, but charging what they do for this complete waste of time is ridiculous.

This screen protector was Super easy to install. No bubbles, No mess, Really clean installation. In about 6 minutes. Update, Use two of these and both started to come up in the corners a few days after installation.

This wet application glass protector went on without much hassle, however I noted some issuesThe plastic frame that holds the phone was not for the OnePlus 12, rather the oppo find x6 pro. The OnePlus 12 fits very similarly, however it wasn't perfect.The glass protector did fit the screen very well, however the glass does not have rounded edges making the edge surface rough and catch on anything that brushes against it, as well as making it not fit well in tight cases and peels the protector from the pressure.The UV cure adhesive cures nearly instantly so make sure the glass is exactly where it should be, before powering on the UV light.With those couple issues resolved this would be a 5 star product.

Applied easy and fit great, but there is no cutout for the front camera and the adhesive sits oddly around it, in my case it doesn't mess up the image that I can tell but it certainly could

First off, great product but it took some practice getting it right. The first time I tried installing the screen protector didn't well and I ended up making a mess. The 2nd time I got it right with the glue going to all areas really well. I ended up getting a crack in it a few weeks later during a biking trip (completely my fault). I ended up installing the 3rd screen today and it went flawless again. Saying all of that, this product is really good. However, it is only as good as the attention and patience you put into it. Watch the video carefully, ensure you have a level surface, and take your time.

I was really disappointed in this screen protector. During installation, it's hard to get the glue to spread to all parts of the screen protector. In addition, after a few days the edges started to lift up and attracting dirt. I got a crack at the edge of the screen protector with minor pressure. I would not recommend.