RESIONE Water-Washable 3D Printer Resin - Crystal Purple, 1kg - Clear, High-Speed Resin with Excellent Fluidity, Easy Water Wash & Low Odor Operation

Use the recommended sounds and the prints are almost perfect! I love the color and how shiny it is.

This resin is very watery but the prints come out very nice with some light sanding and a clear coat. The smell is very strong and you have to wash it very long in water to get it clean

3d figures made from this resin bring the word "Steadfast" to mind. 3d prints made from this resin seemingly would be good in a setting where there's a lot of mirrors.

This is my first time with clear resin, but so far my result was pretty good.The reason is thin, like water thin. After shaking there are no bubbles in the vat after a minute or so. The rooks in the photos are right from the sd card for my Mars 2 pro.The details are at good as any reason I've printed, and the finish is as I would expect. When the prints were wet from the printer they were very clear. More frosted after cleanup and curing.Both prints yellowed in my diy curer, but the manufacturers website does mention this and says to wait a day, or so in Booking water for 30 seconds. The piece on the right was put in boiling water for 30 seconds twice, and looks much better.I can't speak to durability, but I can feel a little bit of give if I press hard enough with no cracking.I think with some high gloss clear these will look great.I have another print running already, and I'll update it I get different results.

The first thing that I noticed about this resin was how it was more like water than normal resins. Surprising, but results are what matters. First I tried to narrow in the proper layer timing...and that didn't work well. My first print attempt failed, so after cleaning out the resin vat and the mess, I looked at other comments and saw most people just hit the middle of the specified range and that worked. It does, but is it overexposed? under? No idea. What I did notice while trying to test for the right exposure time is that it doesn't much like IPA, which for the thin test prints they warped, a lot for the ones I tried some on. Although the last one I did also had some warping just using water. It is very soft once it finishes a print, which makes support removal easier, but some warping might still occur. It does wash reasonably clean when rinsing with water, but really the stuff is so thin that if you let it sit for a little bit to drip most has come off already.I think what I most disliked about it is how much messier the cleanup of the supports can be. With normal resin, I'll wash it, and then let it sit and dry for a bit then clean off the supports. The way this resin might warp I decided I should clean it up as fast as possible and get it fully cured before it might start warping. Lots of small bits on the print. I still need to finish cleaning it up, lots of little bits of support that are loose but still on the model.I don't think I would use this as my primary resin. I personally found it more messy than other resins overall, even though the print quality seems to be pretty good.

This is the first time I tried an orange resin and boy are the prints pretty. It took me a few tries to get the settings right but it was well worth the effort. The final prints are visually pleasing though a bit on the delicate side. This resin is ideal for figurines and minis and I wouldn't print anything that would be used for mechanical/structural purposes. It is a WW resin so requires a bit more effort during post-processing than regular IPA resins.

This creates a ton of fumes, far more than other resins I've used. Even with a HEPA filter with activated carbon, the fumes permeated the entire room and spread to the rest of the building. I would not use this indoors even with an air filter or fume hood. Print quality seemed good, but the print would not come off the plate, which doesn't happen with other resins. Despite this, it's a decent value and the prints look good if you can deal with the other quirks.

This review is for the Crystal Clear color...I used my default printer settings which were all within the recommended settings for this resin, the first thing I noticed is that this resin is nearly water-thin, it doesn't have much body to it at all.. As far as how it prints and detail reproduction this resin performed well, very fine details popped... When the print was done, I noticed the thin areas were crystal clear the thicker areas had a yellow tint... And as soon as I post curred it BAM the entire print turned an ugly yellow/amber tint... Their website says to wait a day for the yellowing to fade or drop it in boiling water for 1 minute, I dropped it in a cup full of boiling distilled water and about a minute later presto, the thin parts were back to crystal clear again, the thicker parts still had a slight yellow tint, but I suspect that may fade in time or just need a longer exposure to the boiling water... As I said it produced very fine details, the print looked pretty good right out of the printer, but it really popped when I gave it a quick dusting of clear acrylic gloss spray paint!The water clean up was beyond easy, so much easier and less hassle that alcohol cleanups...The reason for the 4 stars vs 5 is because this stuff is brittle, like dried leaf brittle in thin areas and I fear that if this piece is displayed near any UV source (sun) it may yellow quickly as it did during post-curing, only time will tell...

ELEGOO Saturn 2で使用綺麗に造形でき匂いも気になりませんでした

Sonicminiで印刷しました。ボトル記載の設定で十分な仕上がりになりました。

レジンの臭さが他の物に比べ強くなく使いやすかったです粘度が低く少しシャバシャバ感がありますが使うには全く問題なかったです完成度が高くて良かった

FDM式の3Dプリンターはこれまでも使っているのですが、このたびレジン式のプリンターを購入して、初プリントをこのレジンにしてみました。プリンターはCreality HALOT-MAGEです。FDMだとフィラメントの種類だけではプリント設定が決まらず、ハードウェア的にもどんなプリンタ、エクストルーダー、ノズル、ヒートシンク、などなど。。。プリント設定的にも温度、スピード、リトラクション、冷却、などなど。。。成否を決定するプリントパラメーターがありすぎて、単純にメーカーの推奨設定ではうまくいかないことが多々あります。その点レジンプリンターは良いですね！FDMプリンタのように線で立体を作っていくのではなく、一層毎に面で積み上げていくことになるため、プリントの仕組みが単純です。推奨設定の範囲で限られたパラメーターをいじれば大抵うまくいく印象です。他のレジンを使ったことがないので比較できないのですが、いろいろな情報を読むと水洗いでないレジンは廃液やプリント成果物の後処理が大変で臭気が強いなどの問題もあるということです。また粘度の高い材料だとトラブルも多いとか。その点、このレジンは本当にサラサラですので、べとついて付着することもありません。固体化していないレジンは簡単に拭き取れますので、成果物やプラットフォーム、バットの清掃も簡単です。プリント中は普段感じない臭いがしましたので独特の臭いはあるようですが、気になって不快なほどの異臭ではありません。ほんとうは臭いが全くなければ良いのでしょうが、たぶんそんなレジンは無いのですよね。ひとまず、簡単に使用できる初心者にも安心なレジンとしては大変良かったです。他には安価なレジンもあるようですが、趣味の範囲でチビチビプリントする分には、一度買ったらしばらく買わなくてもすみそうなので、そんなに過剰な出費でもないと思います。

ELEGOO Mars 2 Proに使用。透明なレジンは初めてです。レジンの強烈な匂いは少なかったです。早速ちいさなスタンドを製作してみました。IPA洗浄はめんどくさいので水洗いのこの製品が良いですね。仕上げに一応しっかりとUVライトで硬化させました。細かなところまでしっかりと印刷できて大満足です。