Tobeso-NuozeTobeso-Nuoze Luggage Wheels Replacement Suitcase Wheels Wear-Resistant Spinner Casters Repair Kits （W149,4 pcs

I have a Delsey carry-on that's about 11 years old. I'm fond of it and so wanted to keep it rolling. These wheels fit almost exactly, but the curved lip was about 3/16th of an inch short. Because of that, the wheel did not fit flush on the bottom of the carry-on. I took the wheels to the local hardware store, and the owner sliced the lips off both wheels with a sharp knife. (You can easily do it yourself if you are handy with a sharp blade or box cutter.) Then, using the original Delsey inside piece, I was able to screw in the new wheel. It's very solid and working fine. I'm happy I was able to salvage this piece of luggage, and I saved the other wheel for future use.

Worked . I thought it was going to trash my luggage because of the wheels. They fit great

This is the closest replacement I could find after combing the internet for Swiss Gear suitcase wheels. The screws lined up and the measurements matched, but the edge of the wheel apparatus was too small to capture the edge and prevented the wheel from mounting to the interior plate. Another reviewer mentioned this and the issue was solved by having someone with a powerful saw remove the edging, which then allowed him to replace the wheels. Having neither a saw nor a friend with one, I held the wheels over my gas burner in the kitchen in the hopes of softening the plastic and bending it flat with some pliers. And it worked. Was it a perfect solution? No. Did it save me some money and keep a suitcase out of a landfill? You betcha. I have attached some photos of how the old one fit and how the new one fist so you can see what I am taking about. Who knows, maybe yours will fit perfectly and you won’t need to MacGuyver the wheels. But I offer this as a solution for those who may be in a similar solution. 18.99 for two wheels beats 129.99 for a new suitcase every time.

Neededto replace a wheel of my Samsonite carryon.I took careful measurements , ordered the only one that matched the size, 2 days later ,my wheels(ser of 2)were replaced , easy job.

It took a while to assemble the new wheels to the luggage. Had to drill open the holes on the luggage as the lip on the new wheels was not the same as the lip on the old wheels. And would not go into position without the drilling operation. If you have a drill and an hour of your time and a bit mechanically inclined, you can accomplish this task. It is cheaper than buying a new suitcase. The wheels are of good quality, just time consuming to assemble them.

Couple of wheels on my favorite Travel Pro luggage came off after many years of use. Rest of the bag is still very good. I wanted to try fixing it before discarding. I found this set and also read a review by someone using it for their travel pro suitcase. I tried it following the instructions. It worked very well. Even though only one wheel needed replacement, I replaced two on the same side so that they are even and suitcase won’t be wobbly. Now it is ready for a trip!

Same as the OEM wheels on our iFly luggage. Simple replacement using 4 screws per wheel assembly. Seem to be good quality. We shall see how they hold up.

Second order in as many days that arrived with only three wheels ... and not only that ... both included a flat head screwdriver, however, the installation screws require a Phillips screwdriver!