18 PCS Titanium Oscillating Tool Blade Metal Cutting, 4 Types Professional Oscillating Saw Blades for Metal Nails and Wood Plastic, Multi Tool Blades Kits Fit Bosch Dewalt Ryobi Milwaukee

I ordered these blades for my DeWalt XR oscillating tool (Model DCS-354) as I had gone through my old set of DeWalt blades on a DIY plumbing project. I was a little skeptical that these AMZBSAW blades would equal the DeWalt blades I have always used in this tool but was to say the least pleasantly surprised.The set comes with 18 separate blades of varying length, width, and style. Additionally, there are a couple of adjustment rings included in case you need to adapt these to fit your specific tool. Fortunately for me, these blades fit spot on with my DeWalt and have worked great with no slipping no matter the task.I tried a couple of these blades out to see who well they cut wood. I took an old pine 2 x4 and cut out a couple of one inch notches on the end of the board. Each cut I made was like using a hot knife through butter to include a 2 x 2 inch square I cut at the end. There was still plenty of "go" left in the blade I'm sure and can't wait to use on a real DIY project. I then took a couple of 10d nails and drove them halfway into the end of the 2 x4 and set about trimming them flush with the last blade I had used. They cut great and as well if not better than the new DeWalt blades I had been using. I then cut a notch around the remainder of the nails still in the board and as before, like butter.I'm really happy with the fit, performance, and so far durability of this blade set. It has definitely exceeded what I was expecting and is a pretty good value at their current sub-$30 pricing.

Right off the bat, these are not as good as the name brand expensive blades. But they are a small fraction of the price. Because of this they are great for everyday or especially tough jobs. If you ruin the blade just toss it and grab another. They fit well in my tool. And cut reasonably well. I've had other blades around this price point that do perform a little better, but these are still pretty good for what you pay.Overall these are a good buy.

This set is a really great value for titanium coated blades. Each blade works out to be a buck and a half. For the same price as this set, I've gotten far fewer blades from other sources. Given that oscillating blades tend not to last very long, despite the overblown claims I've seen of "5x longer" etc., all the blades I've ever used have lasted about the same amount of time. Especially when you're using the blades to cut metal, or you hit a hidden nail, the blades will wear out pretty fast in my experience.In terms of value, I think this set can't be beaten. It comes with four different styles of blades, and one of the styles I like, which are the extra long ones. Those have a 2.5 inch depth so you can cut into thicker material than a standard 2x4. These fit onto my Ridgid JobMax head with no issues, and I really prefer the mounting style of these, where the mounting hole is open in the back. It makes changing blades faster, at least on the Ridgid. There were 3 adapters that also came with these blades. I didn't need them, and I don't know what brands they are needed for, but you can check the photo and decide for yourself.I rate this set as a good value set of oscillating blades. They are getting the job done so far!

Installing these blades on my tool was a breeze, and they just "get it done" without any fuss. The variety in the set, designed for all types of materials makes them incredibly versatile for different projects. It's a no-nonsense product that delivers exactly what it's supposed to, making it a must-have for anyone looking for reliable and efficient oscillating saw blades for projects.

These work just as well as the name brand ones for so much less.

This is a very nice small variety set of oscillating saw blades. Being made with titanium blades and bi-metal shafts, these should last a while if not cutting metals. The set includes three different length blades and four different cutting widths of 1-3/8", 1-3/4", 1-3/4", and 1-9/16"inches. The set also comes with three adapters that should fit many different makes and models of oscillating saws.I like how these cut wood. I did try it on a 16p nail I had pounded into the side of a 2x4, and then cut the 2x4 perpendicular to the nail. I cut right through the wood but the blade had to wrestle through the nail. Afterwards, I looked at the blade and could see, more than a little, wear on the blade. The promo page says "if cutting VERY HARD material, please don't keep cutting." I would certainly stay away from cutting metal if wanting these blades to last. For wood, they were excellent and that was my intention when ordering these. I read one of the other reviews and wanted to try it with nails as well, and I pretty much agree with his assessment.

Every one of them broke where they were put together. Still sharp when they broke.

Lasts a long time for an oscillating blade...which you already know is surprisingly short compare to many other saw blades. The extra long blades that come in this set are really handy in hard to reach areas. Be sure to use the right tooth type for the material you're cutting and if the tool has a speed adjustment be sure to set that as well. Using the wrong teeth type for your application is a quick way to burn up a blade; same as the speed as well. There's a balance between too fast and too slow. Overall these seem to be good universal blades. I haven't had any of these break. I've used a little more than half of these with all types of wood from hardwoods to soft and some sheet metal work as well. No issues. Good value for the amount of blades you get.