TH360 V2 Ultra ARGB Sync/AlO Liquid Cooler/ARGB Fan 120 * 3/PWM 500~1500rpm/Water Block 2.1" LCD/Black, CL-W384-PL12SW-A

As a builder who has run the gamut from air towers to custom loops, the Thermaltake TH360 V2 Ultra is the most balanced AIO I’ve integrated into a build. It successfully bridges the gap between "enthusiast performance" and "showpiece aesthetics." Thermal Performance & Acoustic Profile: Testing this on a Ryzen 7 9800X3D , the 360mm radiator surface area is more than sufficient. Under a sustained 30-minute Cinebench loop, my temps stabilized at 35°C which is an impressive level of performance; the PWM fans remain remarkably quiet at the 1200rpm mark. The 500-1500rpm range is perfectly tuned, inaudible at idle, but powerful when the TDP spikes. The 2.1” LCD Display (The X-Factor): The resolution on the 2.1" screen is surprisingly sharp. Using the TT RGB Plus 2.0 software, the customization is intuitive. I transitioned from monitoring real-time GPU/CPU temps to uploading custom weather-informed GIFs. It’s bright, the viewing angles are wide, and it doesn't suffer from the "washed out" look of cheaper LCD blocks. Installation & Cable Management: Thermaltake clearly listened to feedback on the V2. The fan interlocking/cabling is streamlined, which made the "cable-tuck" phase of my build 20 minutes faster than usual. The mounting bracket for AMD was sturdy and provided even pressure across the IHS. Pros: Visual ROI: The LCD transforms the look of the entire interior. Daisy-Chain Efficiency: Significant reduction in cable clutter. Versatility: High thermal ceiling for overclocking, but quiet enough for a studio environment. Cons: Software Dependency: To get the most out of the LCD, you must be comfortable with the TT software suite (ensure you have an internal USB 2.0 header available and 5V rail header). Footprint: It’s a beefy 360mm radiator; verify your case clearance for mounting. Final Verdict: If you are building a "zero-compromise" rig where you want to see your data and your style simultaneously, this is the unit. It justifies the "Ultra" moniker through build quality and ease of use. 5/5 Stars.

This unit works perfectly, and it drops the temperature radically. I installed the 360mm version in my media server this morning and then ran the Intel Processor Diagnostic Tool to see how it fared. SERVER INFORMATION: Intel i7 4790k processor ASRock Z97 Extreme 6 board 16 GB Ripjaws PC3 12800 RAM Corsair RM850X power supply MSI GeForce GTX 1070 video card 10 hard drives (9 internal and 1 external) Pioneer BDR-209DBK Blu-ray drive Thermal take Water 3.0 Triple Riing RGB 360 water cooler PERFORMANCE: --- IPDT64 - Temperature Monitor Results --- Temperature Test --- ... Version 1.0.12.64b.W ... 57 degrees C below maximum Test Result - PASS Expected Greater than 1 degrees below max Received 57 degrees below max This result is amazing, and I cannot say how happy I am with it. The cooler was purchased for my media server that is used for transcoding 1080p video. Before adding this cooler, I could get over 200F when transcoding multiple streams with the processor NOT overclocked. This was unacceptable, so I sought out a better solution. With this cooler, my maximum reading (on only one core) has been 170F when transcoding multiple streams AND overclocking the processor to 4.7ghz. I have been stress testing the server this whole afternoon with the processor overclocked and the temperature has never gotten above 176F. This result was with all cores of the processor pegged to maximum. INSTALLATION: Installation is not terribly difficult, but it does take a bit of time. You will need to remove the fans from the top of your case, to prepare for the install. The radiator comes without the fans attached, so you can choose to push or pull air through it. You will need to attach the fans to the radiator, then I would recommend installing the radiator to the case before connecting the pump to your processor. Attaching the pump to the processor is simple, as the unit comes with clever brackets that can be configured for basically everything. You will attach a backplate on the back of your motherboard; it attaches with sticky tape. You will need to choose the proper ring for either Intel or AMD, then follow the directions for setting the width of the screw holes. Select the proper thumbscrews for your processor, and press them into the holes on your connector ring. Once you have the connector ring set up for your processor, remove the protective cover from the pump and carefully attach it to the connecting ring, then put the locking ring over it to secure it in place. The pump comes with thermal paste already properly applied to the face, so you can now put the pump up in place, locating the screws into the screw holes in the backplate and screw the pump down securely. Simply connect the pump to your CPU fan connector, connect the light/fan controller to another CPU fan connector on your board, then connect the fans to the controller. This process took me about 20 - 30 minutes, as I was careful, and took my time. You should be able to do it in about the same time if you are careful... faster if you are in a hurry. :) I cannot recommend this cooler highly enough. FIVE STARS

Great cooler! My CPU Never goes above 68°C! Works perfectly, and comes ready to install off the bat, and is an easy install. RGB works perfectly, and fans compete with Noctua fans in silence. Would recommend

Recomendo

It's, it's, it's......beautiful! Screen is sharp nice resolution for gpu/ cpu temps and pics/ gifs. Buy it

I purchased this to cool my 15-12600KF, which is a notoriously hot CPU (TDP 125W) and it does it with the greatest of ease. Even after a 1hr stress test on OCCT pushing the CPU and GPU at 100% I never saw CPU temps above 50C. The design works perfectly and the LEDs daisy chained into the ThermalTake PC case LEDs easily. The build quality is very impressive and aesthetics are great too... I couldn't recommend this product high enough!!!!

I love it! Almost went with a cheaper cooler at first... Absolutely no regrets spending a little more money and getting this one. It was easy to install and it looks beautiful. Most importantly it does it's job well.

Excelente este enfriamiento liquido, muy chingon el detalle personalizable de la pantalla , 10/10 👌🏻