🚀 Elevate your kitchen game with GROHE Start Edge – where speed meets sleek sophistication!
The GROHE Start Edge QuickFix kitchen mixer tap features a high C-spout with 360° swivel, a 28 mm ceramic cartridge for precise control, and a pull-out spray with a 552 mm hose for maximum reach. Its QuickMount system enables tool-free installation, cutting setup time by up to 70%. Designed with isolated inner waterways, it ensures lead- and nickel-free water, complying with drinking water standards. Finished in polished chrome with a modern style, it offers durability backed by a 5-year warranty.
| Manufacturer | Grohe |
| Part Number | 30550000 |
| Product Dimensions | 21.5 x 11 x 35.7 cm; 2.2 kg |
| Item model number | 30550000 |
| Colour | Chrome |
| Style | modern and shiny |
| Finish | Polished |
| Material | Polished Nickel |
| Installation method | Single Hole |
| Item Package Quantity | 1 |
| Number of Pieces | 1 |
| Flow rate | 8 Litres Per Minute |
| Hose Length | 552 Millimetres |
| Number Of Holes | 1 |
| Spout height | 357 Millimetres |
| Spout reach | 215 Millimetres |
| Handle/lever placement | Center |
| Number of handles | 1 |
| Handle material | Metal |
| Plug profile | Deck Mount |
| Special Features | Pull Out Sprayer extendable, 360 Swivel, Lead Free, Adjustable Hot Limit |
| Included Components | Installation Hardware |
| Batteries Required? | No |
| Item Weight | 2.2 kg |
S**7
Looks Good works Good
Very classy tap. You can trace the washer when it’s gone etc:: can’t do that with most. Easy to use very professional feel.
S**S
Looks good and works well
Stylish tap, looks good and easy to use, would but again 👍
M**S
Good product, easy to install and adapt to the UK
A good, smart-looking product that does work in the UK.To install in the UK, buy a pair of 3/8" tap tails from your local Toolstation for around £3.50 (Jan '24) to fit the female threads on the tap's connectors.If using Speedfit, secure the tails first by holding the smooth tail gently in a wrench, wrapped in a bit of inner tube or similar so as not to scratch or distort them (there is no nut on tap tails). Use a second wrench to tighten the tap to the tails. Then pop on a couple of Speedfit service valves and off you go.This mixer has a noticeably lower flow than the tap I replaced, but I'm on a mains pressure fed system and it's plenty good enough, with an easy to control flow that's good enough to for rinsing and washing, without wasting water like a jet wash.The easy-fit built in wrench works well, notwithstanding the probability that the rest of your under-sink plumbing gets in the way of everything you try to do.
B**R
Looks great but requires specific fitting adapters
A great tap from Grohe, looks excellent. Works best with a pressure system as the feed pipes are narrow, but on the plus side this means you tend to use less water which is good for the planet. You can rinse things easily, but it's not a jet wash.The long flexible tails screw into European valve fittings, so you will need to purchase a pair of:- 15mm x 3/8" bsp adapters.Hold the smooth 15mm end firmly but GENTLY in a water pump plier, wrapping it first in a protective piece of old bike inner tube for both grip and to protect the surface from scratching. Don't crush it. Then use a separate small wrench to tighten the tap female end onto the male end of the adapter. You could use PTFE tape to seal, but I have not found this necessary.Then, the 15mm smooth end of the adapter can be connected to existing copper pipework or, in my case, popped straight into a Speedfit 15mm isolating valve.
A**R
Washer not fit for purpose
Washer not fit for purpose - I had to buy a new washer as it didn’t sit flush and therefore water leaked
S**
The flex pipe spits out with to much water pressure
We've had this tap fixed on our kitchen sink and when the tap is turned on fully the flexi hose forces the nozel from the tap
F**I
very goid
very good
A**R
A great tap - very happy !
A great tap - very happy !
Trustpilot
2 weeks ago
1 week ago
