Nilight 8PCS Motorcycle RGB Led Light Kit Waterproof Multi Color Atmosphere Neon Accent APP and Remote Control Underbody Strips for Harley Davidson Honda Kawasaki Suzuki

I’ll preface this review by saying that I have never done any wiring before or have any experience with electrical work and this took me about 2-3 hours to install. I haven’t used the app, but the Bluetooth remotes are nice. I stuck the keychain remote with adhesive underneath my left handlebar on the fairing of my R3 so I can turn it off/on easily. Tools needed were wire crimps/cutters, and your basic tools for removing fairings to run the wires easier. It is possible to run them without adding any extra wiring, just takes some brain power. The adhesive is super sticky but I used a few dots of superglue for extra peace of mind on the ends. Zip ties to hold wires in place when running them through the bike.I love these. I bought them primarily so I would be seen better at night, but the side effect is thumbs ups and head turns! Awesome! They’re bright as hell at night, and I even leave them on during the day because I have two strips mounted in the front so they act as daytime running lights.The only issue I’ve ran into is when I turn the lights “off” they tend to just turn to a dim green color. Luckily I caught it before they killed my battery. So to mitigate this I usually just disconnect them when I’m done riding for the night.Overall 9.9/10

I ordered these to spice up my 01 Softail. Man what a great decision!! Took me about 15 minutes to figure out where and how I wanted to mount them. After that it was a breeze. There was enough wire included to do the install without having to buy and extensions. The lights are bright, these are just simple ones with preset lighting patterns and no app control, but perfectly fine just for that little bit of show. So far great product and worth the price.

Installation was easy if you have mapped out your mounting locations and removed the necessary fairings. Extensions would've been nice since 2 of the strips couldn't reach my predetermined mounting locations, so I had to mount them in another area where the wires would reach. The BIG negative is that the adhesive is no good. Be prepared to have your own 3M tape or preferred adhesive ready to go, because even on a pristine clean surface the strips immediately fell off and just wouldn't adhere. I even tried heating the adhesive with a heating gun prior to mounting and the strips stuck for about 2 seconds and completely fell off. I ended up using Gorilla tape that I had lying around, but you'll think that a more robust adhesive would come standard with the package, because who wants their strips falling off during their ride. Other than that, once I got them all installed I like the final look and they are plenty bright!Update: After a few weeks of owning and running these lights, I woke up one day to a dead battery. No I didn't leave the lights on and I ride daily so no downtime. I read some reviews before buying this time around about these lights drawing a huge amount of current when off. Well it just happened to me. I've decided to disconnect them from the battery and run without lights for the time being.

Easy to install. Even easier to use. Definitely increased visibility on the road and looks sleek too.

The media could not be loaded. This kit is great! I used CRC Dielectric grease on every connector.I live near the ocean so salt air is always an issue.I installed these on my 2021 Harley-Davidson Road Glide Special. Layed out a moving blanket. You'll need the wire extension kit they sell separately!Removed Seat, saddle bags, covers and fuel tank. Always pull the 50 Amp fuse when doing any electrical work on your bike!!! Start by laying out the LED strips and figure out how your going to have everything meet up at the battery. I used up some extra space near the antlock brake module to house the module for the lights and ran the wires to the battery.Took about 90 minutes.Used tie wraps for under the saddle bags and be sure to make note of the position of the underneath saddle bag bumpers. Tie wrap ends should be facing almost downward as to allow the bag to be reinstalled without an issue. Value for the money is great. Quality of the connectors and shrink-wrap used was proper for not allowing water in. Every connector not used was tie wrapped and tapped off for future use.I have two more that I just might add to the very underneath of the bike at a later time. For now, I'm happy with how they look.I highly recommend this product.The little key fob is perfect!

The lights are bright and definitely head turners. Good size and great buy for the price. I gave it 3 stars because they malfunctioned and turn on randomly and drained my battery twice that I had to replace. It's a good buy but it's a 50/50 that they will actually be useful after a few months

Self explanatory kit, works great and looks good too. Would buy again