Urageuxy Wireless WiFi Weather Station Anemometer with Solar Wind Speed/Direction, and Indoor Outdoor Thermometer and Hygrometer

The weather station works well until it didn't. I experienced some issues after a couple of months with the weather station on my tri-band network. It dropped off and would not link back up with my WiFi. I contacted their support department who were quite supportive and continued to work with me until we figured out that it needed to connect to a 2.4Ghz WiFi WLAN. Once I created the 2.4Ghz WLAN on my access point it connected without a hitch. I cannot say enough superlatives about their support department.

The media could not be loaded. This weather station was very easy to set up. The anemometer can be mounted on a vertical surface, horizontal surface or onto a pole. It comes with all the brackets and hardware for mounting. The anemometer and the thermal-hyro sensor Require AAA batteries that are not included. The display console runs off of AC power but has the ability to run off of AAA batteries should it need back up power. The display console is extremely easy to read with it large numbers and bright colorful background. It has the ability to be the single receiver for up to eight transmitters. Each of the thermostat-hydro transmitters has a DIP switch inside so that the positions can be changed so that each transmitter is on a different channel. I tested the transmission speed from the anemometer transmission to the receiver console. The new wind speed and direction were recalculated and displayed within a few seconds. The receiver console also connects to Wi-Fi. I can add a device to already existing Wunderground, PWSweather and weathercloud accounts or create new accounts to upload my weather data. There are two different manuals. One is for the weather station. There are a lot of other features that can be programmed and mit can even me manually calibrated. This manual has the step by step directions clearing laid out. The second manual is for the wifi setup. It includes step by step instructions as well as printed screenshots of the wifi setup on a computer to make it as simple and full proof as possible.

Been working well thus far just remember items need to be clear/close to each other to get a good reading. I didn't put the battires in the wind direction feature because it was solar and works this way just fine.

Took a chance and impulse-bought it, as it was discounted. The unit has some flaws in design, as well as a few manufacturing issues. Number one is the display on the base unit. It is unreadable unless you are at the absolute correct angle. You cannot get a 'glance' at it.Second biggest issue is the sync with the hygrometer and the home unit. I have tried over and over, with all various Channel options, and it will not sync at all with the base. Unusable.Third is arguably the most important but might be fixable. The wind speed measuring tool has a spot where it binds just slightly. It does/did not spin freely out of the box.If you cannot reliably measure wind speed, or read the unit, or get accurate humidity data, then what is the point?

The setup was really easy. It gives accurate info. Having the temp and windspeed for your specific area is really nice. Definitely a good purchase.

This is a great weather station. Connects easily and able to see everything quickly and easy. So many functions

Dad's everywhere can unite around this item. Now I update my family daily with the weather as if I was on TV. I stuck the little wind meter on top of my kids playhouse. I put the indication screen in front of my wife sink. I have the humidity monitor and temperature transmitter on the back porch. This thing is awesome! It shows the date, time, temperatue, humidity, wind gust speed, average wind speed, wind direction, and just about everything else you can think of. It was very easy to set up, and is easy to use. I really like how it tells you the temperature and humidity inside and outside.

Works. Hubby is happy.