Boat Flooring EVA Foam Boat Floor Decking Sheet Self-Adhesive Non-Slip Boat Carpet Marine Deck Flooring Mat for Boats Yacht Swimming Platform RV Floor Kayak Surfboard Golf Cart 94.5"× 35.4"

It's ok but seems to be not very durable. Doesn't seem it could handle a lot of traffic. Returned without using it.

I used it in the cockpit and seating area of my 40’ boat but did not want to glue it to the deck floor. I used 20mil clear upholstery vinyl as a backer and installed snaps to use in place of my cockpit carpet. I am able to remove the sections and wash them separately. They keep the floor protected and are easy to snap back in place after cleaning. I installed them five years and they have held up better than I expected. I am ordering 2 more sheets to redo the two most used sections which have some food stains, sun shrinkage, and a torn snap which is to be expected going on six years of use. Overall it is a great value and good alternative to the brand name product.

I had carpet in my 01 Four Winns Horizon 190 that was junk. I removed all of the snaps. I did have a non-skid surface that I sanded with some 80 grit. I didn't sand it completely smooth, but I took most of the "ridges" off of the non-skid material. Basically, the more smooth area, the better adhesion.I didn't want to trust this adhesive material only, so I used 3M's marine 5200 adhesive. This stuff isn't cheap but it's the best sealant on the market in my opinion. I used 3 regular caulking tubes and spread a thin layer entirely under the EVA mat.I would suggest having two people place the material down, because once it's down, there is no wiggle room or adjusting.I must say that I ordered 4 sheets of this stuff and I let it sit in my garage rolled up for several months until I got time to install it. There was one end of one of the sheets that appeared more "gray" than the other sheets. No big deal honestly, I knew I would have some waste so I just used the other end of the sheet.This stuff cut easily with a razor blade too. Just don't be a cheap person and think just because a razor blade is in your utility knife that it's razor sharp. Do like I did, and start with a new blade. Flip it around or change it as required. Those things are cheap any ways.I'll be sure to come back to this review and update it if this stuff starts to wear out. We keep our boat under a cover & out of the sun & it gets about 20-40 hrs a year of use. It is stored under the cover & in a pole barn during the winter. That being said, I'm expecting the edges to try to peel up a little, and if they do, I'll hit it with that 3M 5200. I'm anticipating on getting a minimum 5 yrs out of this stuff.

Product was attractive and easy to install, however after extended sun exposure the coloring lets off on feet and clothing so kneeling or sitting is not advised. Watch out for shrinkage upon temperature drop.

It has been more than a year and I am happy with the quality and look. It is still holding well. Definitely recommend it.

I decided on this particular product from this particular company after having compared it to other similar products. I expected it in a few days Because Amazon prime works like that. I'm used to it. I expect it. Then I found out it's coming from Hong Kong! I thought well I'll see you this sometime in the in the future. I got it in six days. Amazing!I had to put it out in the sun for several hours to warm it up so it wouldn't crack when I unrolled it but the backing says 3M so that tells me they're using a 3M adhesive and perhaps this is the second generation of the product. It looks great. I know when I install it on my boat it'll make a big difference.Update: awful, truly awful! At first it looks great and within a week's time it starts looking worn. Any drop of oil-based material like suntan lotion or olive oil or whatever stains it. Within 6 months I ripped it out because it really did look like crap! I bought a sheet of quarter inch Teak and Holly marine plywood. Now the cabin sole of my Catboat looks great! If you have a boat on display at a boat show this product might be good. But in the real world of boating, awful, I mean really really awfulI should have known better what a waste of time and money.

The product is exactly what it said it would be. Giving it 5 stars because you can’t make your boat look brand new for any cheaper. I redid my 20’ center console with 4 sheets and have some to spare. First I ordered the hydro turf knock off. Off of amazon. It was way to hard and very thin. Returned it and went with this. The material is much softer and more pliable. Cuts very easy with a razor knife. My only caution would be to MAKE SURE to double up on your adhesive. I used 3m maximum strength spray adhesive with the sheets and the stuff is never coming up.The bad reviews are probably coming from people who expected too much from the product. If you want high end sea decking? Go with actual seadeck. I did my whole boat for 300$ and people compliment it every time they see it.

Bought this Eva flooring to do my own boat. They come looking different shades but after I pressure washed them all and dried them out they were the same exact shade. This is the first time doing this but since I’m a picky guy I decided to find a way to make this look good like it was cut by a CNC machine. I am a tile guy so I use a grinder all the time at work. I used the grinder with a 4.5” diamond blade to go over the edges and slowly grind them down to bevel for that custom finished look. Ended up applying a coat of contact adhesive over the non skid surface before laying it down. Turned out better then expected