KATUR H4 LED Headlight Bulbs, 90W 18000LM 6000K Xenon White Wireless H4 Headlight Bulb Hi/Lo Beam Conversion Kit Halogen Replacement Bulb 1:1 Mini Size Plug and Play 9003 HB2 Fog Light, Pack of 2

Fantastic brightness and range, easy to fit, all in all the best headlights I've ever bought!

I bought 2 packs of these (20 bulbs) to replace my sidelights & interior lights.Firstly they look great as Sidelights & matched the other LED headlights & foglights for white colour perfectly.These are extremely bright & I've fitted them to my f25 X3 (2012) in the dome lights, reading lights, footwell lights & boot lights & they seriously brighten up the interior. You'll not lose anything in the car with these!The fit is tight in the connectors so they're perfect there, however in my 2 rear reading lights they were just too big to fit.They're the same length as the bulbs they're replacing, however the bulbs are rounded at the end (like a bulb should be) but the LEDs are a flat edge. It's the flat edge that just gets in the way on my rear reading lights.To be honest the others are so bright in the entry lights that you don't need separate reading lights anyway so no issue.Worth the manufacturers knowing for future though.Fantastic for boot lights if you have the same fitting, the boot is lit up perfectly too.Hopefully they last as long as they're supposed to.

I was looking forward to improving the lights on my 2 year old Peugeot Rifter,I was confident after reading reviews that these bulbs would be a good choice.I fit the Katur Led bulbs correctly with leds facing 3 and 9 o clock,they looked good and bright against the wall but when I got out driving on the road these bulbs were about half as bright as the original halogen.the light was like a shadow light,no distance and weak.Waste of money.I do not recommend.

Firstly, no errors on a 2013 BMW 1 series or a 2012 Kia Sportage - this is the H7 bul I am referring to.Secondly, I haven't seen it mentioned in any other reviews - you can fit these bulbs in two different ways, with the LED chips in the 3 and 9 o'clock position or 12 and 6 o'clock position. How you install them will have an effect on the light beam range and pattern. The 3 and 9 o'clock position seems to be good for a projector type headlight (in my experience). But you should try both positions and see what works best fpr your headlights.They're bright, white and look good. Happy so far.

On the plus side, these are very bright, have good all round coverage and dim as you'd expect halogen T10 bulbs to. Considering you get 10 in a pack they're a bargain as well, and you can replace most bulbs in your car (for example) with a single purchase.On the downside it's irritating that the polarity isn't stated anywhere on the bulbs - in many cases the only way to find out is to fit them, try them, and then disassemble again when they're the wrong way round.Also, despite the description saying "T10.Sized to perfectly fit your housing and plug directly into your OEM sockets" the bulbs are actually a couple of mm wider than a standard T10 bulb. If your enclosure is very snug they may not fit at all.However, these niggles probably won't be a problem for everyone, but it's something to bear in mind - especially if your fitments are from the rear of the bulb holder where the gap may be very small.

Nice and bright.

Bulbs fit as expected and are also as bright as expected (very bright!). I have installed them in my VW Polo 2016 Mk 5 interior light and I do not get an error on my dash so all good (although the bulbs are possibly too bright but I did expect these to be bright so can't complain about that!).I have also replaced by boot light with one of these although as the contacts on these LEDs are not on the bottom of the bulb (only on the flat sides) they are not compatible with my boot bulb holder as that is expecting contacts at the bottom of the bulb. I have however soldered a bit of wire round the bottom each of the 2 contacts and they now work in my boot but something to be aware of.However I tried replacing my number plate lights with these and they work but I get an error on my dash telling me to check my number plate lights. I'm not returning the bulbs as I'm using a few of them in my interior light and will find a use for the other few but I would not recommend them for a number plate light on a VW Polo 2016 unless you're happy with an error on your dash.

These bulbs work with canbus the lot,The only draw back youmight get is they are a tiny bit bigger diameter wise than a normal 501 bulb ,but it only happend once & we opened the hole up abit that was it.these do exactley what it says.These actually work.Ozzi.

These are great bulbs, great price and really bright.. bought these as backup bulbs

El paquete llego mucho antes de lo esperoado, los bombillos son bastante brillantes, estos bombillos son mas grandes que el bombillo de alogeno por lo que si piensan instalarlos en un espacio justo no ban a entrar, en general un exelente producto.

Lamps have been used as driving lights in MB SLK R171 without any canbus issues. Non polarized, and have worked well for the last few weeks. I would recommend with only one reservation, they are bright, interior lights may not be a good place for them but it all depends on your liking, they are brighter than expected and higher Kelvin temp than standard headlights, which works great to match the front emblem Mercedes Benz lighted star. I think 6000K is accurate.

Acquistate per l auto del mio compagno,una Peugeot 308 allure del 2017 usate per targa e luci interno auto...ottima luce,non danno errore e facile incastro.consigliate!

Funkar som tänkt. Får se hur länge dom håller.