Voron 220V Heated Bed kit, Aluminum Plate of 3D Printers Platform, 368 x356mm Spray-Painted PEI Spring Steel Plate/Soft Magnetic for Voron 2.4 3D Printer

Very good quality extrusions with the Mitsumi profile. The Mitsumi profile is fairly hard to find outside of buying direct. I used these extrusions to add onto an existing Voron build and they were a perfect match in terms of color and quality. The tapped ends were well done and took a M5 easily.The packaging is also quite nice (which is weird to say for extrusions like this). But everything was very well packed and arrived free of damage. Also included a square for helping to assemble blind joints.Photos show a couple of printers that I used these extrusions on.

These products came quickly and all parts seem to be of a high quality. I bought separate kits and have comments on each.Frame: The frame had all straight cuts and went together quickly and did not take much for squaring up.Bed: The dimensions for mounting the plate do not match the dimensions included in the Voron manual. I had to loosen parts and adjust when mounting the bed.Motion: The kit was well put together and included everything I needed. either the belts or the included bearings were not matched in size. after running for about 1 hr the edges of the belts were chewed up by the edges of the bearings rubbing on them.Fasteners: They included way more of some pieces than needed and too few or just enough of others. The kit did not include enough m5x16 bolts if you follow the Voron manual. This kit also does not include the bolts needed to completely build the Stealthburner. I had to order another pack of bolts to make up for the missing ones and luckily had small misc. bolts to complete the Stealthburner. Included fasteners and pieces were of high quality.Wiring: Wires were of good quality but I ended up not using any of them. My steppers came hard wired and I went with BTT Canbus and did not need any of them.Enclosure Panels: Nice quality and of the proper size and shape. The black acrylic has a paper covering which was an incredible pain to remove. I recommend you have plastic razors or scrapers to aid in its removal.

You will not find a better Voron frame kit without spending 2x to 3x the money. This is an excellent kit, already sourced and ready for your project. From what I can tell, the extrusions and pre-drilled holes are precisely dimensioned and located per Voron specs.

By far worse product and company to deal with, honestly wish you can do negative stars

I got this set for a Voron 2.4 I was building. When I got to the point of installing the wiring, I discovered that the 6 pin XY wire had only 3 wires. It was the only wire set that was 1800mm, so I guess I will have to try to make the correct wire.Other than that everything looks OK. The cable chains were adequate, with locking openings that seemed pretty secure. All of the other wires appeared OK but I have not actually run current through them to be sure

I second Carlos, this is a nice kit. Only complaint is that two of the four 530mm pieces were not drilled out in both directions for access holes. Everything else was machined great. The tapped holes are M5 in case anyone is wondering.

This fastener kit would be a time and money saver if it had better quality control.The good:The kit is a good start. Items are bagged and tagged and placed in a divider tray. The T-nuts are high quality and fit perfectly. Fasteners are of good quality.The bad:I am missing the entire lot of M3x40mm (30pcs), some M3 T-Nuts were mixed in with M5 t-nuts so now I have extra M3 but am short M5's. I'm missing 1x M5x16 and now I'm worried what else I'll be short.The missing M3x40mm lot would have been caught with some simple QA by a simple count of filled compartments. Yes, I'm guilty of not checking inventory before I started, and problems didn't arise until 1/2 way into the build. I'd return it but I'm not disassembling. Lesson learned, take inventory no matter how arduous it may be BEFORE you start.Unfortunately supplementing the missing pieces results in costly bulk purchases of the different fasteners, and it adds up quickly. Also results in downtime at the build tableTo make the situation worse, the only documentation you receive is and inventory list. There's no manufacturer information and zero contact information, so I there's no one to reach out to regarding the missing items.

Overall the material quality is excellent. Very clean finish, and high quality material.I have not installed the build plate yet. My only concern is the size of the steel and PEI sheets. This is a non-standard size, and may be difficult to find a drop-in replacement in the future.