notiela Speaker Wall Mount and Ceiling Mount for Sonos One, One SL, Play 1 - Swivel & Tilt Adjustable Mounting Brackets for Sonos One, One SL, Play:1 Speaker Mounts, 2 Pack, White

This was easy to assemble, and holds the speaker securely. I had my doubts about the wall mount but after tightening, it was very secure with the weight of the speaker.

This a very good value and probably the best option for ceiling mounting Sonos 1's. There is an issue with the mounting bracket. The spacing in the mounting bracket for screwing the mount to the ceiling is just a bit too wide to fit within a standard 2"x4" on edge. I was always going to mount my speaker on the diagonal relative to the ceiling joist so it was not a problem for me. I just used more substantial decking screws and 2 were very sufficient to hold the mount in place. See photos. I could have drilled the mounting bracket slightly to narrow the holes to fit within a standard 2"x4", but the plate is fairly substantial and I did not to ruin a good drill bit drilling 2, and possible 4 new holes in each mount.

This mount fits the speaker perfectly. Allows you to still get at the controls on the top of the speaker. I put the long extension on it to get it a bit further from the wall. The swivel is hard to get tight enough to support the weight of the speaker. They should have made it bigger.I’ll probably remove the extension and it may solve that problem.Overall, I’m very pleased with the mount.

This is one of worst Sonos mounts ive come across.All of the threaded holes were so full of rust that a few screws stripped.I shouldn’t need a tap just to install this. I didn’t have one handy and stripped the threads on a couple of the included screws from the rust.I had to find a metric screw to replace it and the closest I had needed a washer stack for it to tighten.The plastic covers are hard to push on with the wires and they end up popping off anyway.The top plate doesn’t sit flush so it looks ugly.Basically everything is wrong.Seriously for the price, I expected more. This is just junk.

We bought these to mount Sonos speakers in our den after reading poor reviews on Sonos mounts. They worked and we are using them but they had the same problem as Sonos. The screw at the neck is not strong enough to hold the tilting part of the mount when the speaker is in them. We were able to remedy they problem by adding washers with teeth to the screw mount and securing the wire in the attack tight to a beam with a hook to hold the speaker up and take the pressure off of the mount. Given we only had this option or Sonos at the time and they both have the same problem I would still buy these mounts again for half the price. Ascetically they look great and once we added the extra steps to secure they work perfectly.

Don’t believe everything you read on these reviews. People are clueless! These things are perfect and went up with ease. I had no issues. They hold the speakers perfectly and don’t move at all. The only thing I would change is screw placement. I used lag bolts so it was fine.

Everything is well instructed except the finished paint surface could be more durable. There are a lot of paint scratches and tiny paint chips come off the small parts even before installation. Hopefully, everything holds up well since the speakers are almost 12’-0” above floor.

These ceiling mounts seems the be very versatile, the price point was nice and affordable. I can’t wait to get into our new home and get this set up. If possible i’ll come back and post pictures.

After a kitchen reno and removing an interior wall, i needed a mount to hang my Sonos Ones from my concrete ceiling. These were the only solution I found, everything else is made to mount them to the wall. They are pricey but worth it. They seem of good construction and sturdy and holds my Sonos securly, Highly recommend.

El producto viene fabricado de buen y resistente material que ajusta perfecto a la bocina. No hay necesidad de hacerle perforaciones adicionales ni ninguna modificación. Viene con la tornillería correcta. Se instala, fija y orienta fácilmente. Muy recomendable.

Die Halterung kommt mit zwei verschiedenen Adaptern. Zum einen für die Wandmontage und zum anderen für die Deckenmontage.Das Material (alles Metall außer die Blende) macht einen sehr wertigen Eindruck. Die einzelnen Teile lassen sich einfach zusammenbauen und passen perfekt.Ich habe die Halterung an der Decke befestigt um Sonos One SL Lautsprecher zu befestigen. Es lässt sich die Neigung und auch die Ausrichtung nach links und rechts alles einstellen. Nach dem festziehen wackelt nichts und hält sehr fest. Die Blende verdeckt die Bohrlöcher mit den Schrauben. Der Lautsprecher sitzt oben und unten sicher in einer Schale die ihn gegen wackeln, herausrutschen etc. sichert.Für mich eine sehr gute Wahl und eine klare Kaufempfehlung.

The swivel mechanism on these are terrible and don't support the weight of the sonos one speakers which makes them droop when mounted with the extension. It needs groves on the inside of the swivel for different angles which could improve this problem. It's a shame as these were the only mounts I could find which offer this much movement but I wouldn't recommend them as the mounts are flawed in design.

I read all the negative comments before buying these. But like another comment, as they are a fraction of the price of the other brackets I would give them a go. Key change from 2 years ago is that the swivel bracket is now grooved so it does hold the speaker in place. That said I still needed to add washers to the screws so no they could be tightened and I also added a felt band around the top speakers bracket to make to tighter. All in all…just take your time and make a few tweaks. These are good bang for your buck.