VonHaus Bike Wall Mounts - Bike Wall Rack, 2-Pack for Garage and Shed - Steel Coated Bicycle Storage Hooks - Vertical Storage Rack with Durable Plastic Clips

Simple concept and hangs the bike with no problem. The mounts came well packaged with an adhesive screwhole template that was surprisingly useful. The mount attaches to the wall using the included plugs and screws which were of decent quality which isn't always the case. In use the hangers work well although angling the bike off to the side to create a little more space isnt really possible as the wheel comes out of the tray due to the side pieces on the tyre tray. Overall high quality and excellent value for money.

Sturdy, easy to install and great price

Not bad at all. Solid metal base and arm. Large wall plugs and screws. Use the template and fitting is easy. Takes my road bike easily. Not sure if I would trust it with a heavy MTB above my car in the garage, without substituting stronger wall fixings.

Be prepared that in terms of assembly: 1) The product itself is easy 2) working out the height and distance between bikes is more of a faff. You should prepare yourself for drilling holes and securing the product to the wall to find that you have put them too close together that your bike handle bars get in the way of each other. So then you have to unscrew the product from the wall, drill some new holes and put it up again further away. [This would have helped if there was some simple instructions with the product that gave a recommend distance between installing the bike hooks]. Top tip: I did find you can put two bikes closest together when you hang one by the front wheel and the other bike from the back wheel; this way the handle bars don’t hit each other. And the product works fine holding either wheel. Very happy with this purchase. Gave me the middle space of my garage back and made it much easier to access the shelves in my garage now that the bikes are not leaning against the shelves. Would recommend. Time to install: 1hr (you may need considerably less, like 15 minutes, but I would be prepared to set aside an hour to install, incase there are any issues). Would also have been helpful for a small instruction that said which drill size bits to use.

Great items, easy to fit, strong and well priced.

Put the bracket on the bike front wheel first to get the right height for the bracket. Well made good quality screws holds bikes well , enough room to fit a security lock.

Quite effective with your typical 2.7" MTB tyres, each bracket is rated for up to 30kg, so could do E-bikes as well. the loop in the frame would allow locking of the bike to the frame with a thin wire, loop could be bigger though. Steel construction, which is powdercoated, finish is a little rough, but the paint tidies it up enough to be functional.. Hook position is fixed and welded. Easy to fit, decent clearance around screw holes for drill/driver, comes with a pack of screws which do not appear to have been made of cheese, rawlplugs, and a stick-on drilling guide.

My bikes needed some storage TLC. So, I cleaned the shed out, bought a drill and all the gubbins, and ordered these wall mounts. Having never attached anything to a wall that was heavier than a coat hook I was taking a leap of faith in my ability, but in for a penny and all that. I measured up for the Trek hybrid at first, installation went swimmingly and I used the supplied fittings on what I think is breeze block ... Getting the bike in the hook was the trickiest part, but that will get easier with time - now I'm no longer worried about dropping it. Everything is secure, no movement on the mount with the bike in place and I'm happy with the end result. I messed up fitting the second mount and committed the wall plugs to the wall but my measurements were off. The breeze block wasn't playing ball. The drill was skipping around. Pilot error all the way. Having no other suitable screws and wall plugs I had to order replacements - easier said than done with my lack of knowledge. I opted for Fischer Duopower screws and plugs. Despite learning some valuable drilling lessons earlier the breeze block was a problem and I could only secure the hanger by 3 screws. More than enough, it's absolutely solid and isn't shifting at all. My Giant Anyroad is now in place, and being a lot lighter than the Trek it's a doddle to get in and out. I had planned to use one of the hooks for a Merida Matts Trail bike but for me personally it was tough going to get the bike up and manoeuvred into position - it's the heaviest of my bikes, with knobbly tires, and I just couldn't co-ordinate the necessary moves. Primarily I wanted my bikes off the cement floor for winter - a first for them - and now that's what I've got. I'm chuffed to bits with these wall mounts.

non adatto restituito

La solución perfecta para almacenar bicis al muro

preis leistung top

Parfait pour suspendre des vélos mêmes lourds. Les platines sont épaisses et solides. Pas du fer blancs qui pourrait se tordre avec le temps.

passt.