2pk 10" 40 Teeth Carbide Blades for Brush Cutter, Trimmer, Weed Eater Blade, Bore 1"

Make no mistake about it, this product is very sharp and capable of cutting brush up to 3 inches thick. I am not an amazon employee. I am a regular guy living in rual Georgia with a few acres to clear. I was very impressed with the initial ability however disapointed with the length it lasted. I was able to get about fours of use before it was too dull to cut but in those few hours the product worked flawlessly. My use consisted of young poplar trees about an inch or so, muscadine vines, young pine saplings, and the occasional dead fallen limb. I was cafeful not to hit the ground or rocks and yet four hours later it was used up. So, be sure your purchase is worth the money you are spending. Thank you.

I don't even know what to say...If your trimmer is big enough and you're not easily frightened, these blades will cut anything.I literally cut over 200 cedar trees ranging from 2 inch diameter up to 8 inch diameter on one blade.Just be careful. If this thing gets away from you, it could be catastrophic. Make all cuts to the left of the blade. Try it on the right side and it will really try to take off on you.Amazing value for the money for a skilled operator and heavy trimmer. Definitely not for the weekend warrior with a big box store trimmer.

I was a little skeptical about these blades. I bought them to clean up around my property that we had just bought. I was very impressed with how well it performed. I cleaned up the small saplings around my pond and the sticker bushes that have grown up by the drive way. The blade is still sharp so I haven’t even had to use my second blade yet. I put this blade on my Ryobi weed trimmer.

I first purchased one of the Stihl brand blades. It was the one that cannot be sharpened. It cost twice as much as these. It worked fine for a while but got dull very fast.These cut way better and way faster than the non-sharpenable Stihl and so far have lasted longer. I am amazed how fast they cut. You do not even feel small branches and small trees.I have used one of the two in this pack several times and no evidence so far that it is getting dull. I sure it will get dull soon but already it has lasted longer than the Stihl and costs half as much. So even if it dulls soon I am happy with the purchase and this will be my go-to blade from now on.Not sure if these can be sharpened. Again, even if not, still a bargain.

These blades (2-pack) are about 20% larger than the factory Stihl brush blade. They mounted to my Shihl FS-91r without the need for the included adapter ring.How did they cut? These blades were amazing. The larger size and extra teeth really ate through saplings. I cut through 2.5” black walnut, wild persimmon, cherry, and blackjack oak.The two pack is a great value. Time will tell how long they last, but for the price, I’m very satisfied.I highly recommend these blades.

This couldn't cut any of my nubby brush stems effectively. This is like using your circular hand saw to cut a dried wooden tree trunk. The blade just smoked blue smoke like it was trying to set the wooden stems on fire, but would not cut them. I'm talking stems 1 inch or less in size, too! Maybe a product with a chainsaw-like teeth would do better, but this product is WORTHLESS in my opinion. I ended up using my chain saw, and it took the nubby stems down to ground level with no effort. Of course contact with the ground dulls the chainsaw blade, which is what iwas hoping this product would let me avoid, plus keep me from having to stop to get the job done.

Looked at reviews for several blade offers and settled on this because of low price.What could I loose?I have used this blade for between 8 to 10 hours, alternating between cutting and pulling brush away to continue cutting.I personally used it for 6 to 7 hours with out a hitch cutting brush up to 1 1/2" thick. My helper used it for the last couple of hours.Today we changed the blade and on inspection discovered only 2 chipped teeth.I just reordered the 2 blade package from this same seller.What more can I say, I am very happy with my purchase, price, delivery and quality all exceeded my expectations.I did cut larger brush but 1 1/2" was about all I could cut with one swing.It cut much better swinging from left to right which is not the safest way to cut so be careful what ever you do.

I tried to use this blade on some large honeysuckles here in Wisconsin, but found that it struggled to get through them (albeit only with a 30cc brushcutter), and that their mass was just not great enough for the application. The biggest reason for the 3 star review is how quickly the blade dulled. This lasted about 1 tank of gas before it no longer felt sharp. I'd be willing to use these on plants that aren't any larger than 1.5"-2" in diameter, but don't go around trying to cut small trees with these blades.