ORICO Dual NVMe SSD Enclosure, USB C to M.2 Adapter for M Key PCIe 2230/2242/2260/2280 SSDs, Tool-Free Installation Aluminum M.2 Reader Support Trim and UASP up to 2x4TB

Got exactly what I was hoping for. It’s nice and solid. Seems to dissipate heat well. Easy to slip into a bag and just go. Great for traveling.

Excellent build quality, works as expected with no problems, and elegant design. What else would could you ask for?

Needs to last longer

I used this for the first time and everything seemed fine. After 2 hours of USB devices acting weird I realized their cable is junk and was shorting my PC. I was able to use my own cable with no issues. Shane on you orico for not using a certified cable! This out of spec USB c cable could fry a drive or a motherboard.

Must use 2 connectors, this is shell for 2 separate connections. Provided speed as outlined, and easy to use.

I purchased this M.2 NVMe / Sata SSD enclosure so that I could work on my computers. I needed to replace a M.2 hard drive that failed to boot, and in using this enclosure I was able to pull the drive and attach it to another computer so I could pull files off of it. Whenever I fix a computer I try to save as many files as possible before replacing the HD or reformatting and installing software. I have several different external enclosures to accommodate different types of drives so this was added to that arsenal. I was looking for an enclosure that could work with several different types of SSD's and this fit the bill.The shell is an aluminum alloy that does not feel as if it will bend. The two plastic trays have a button to slide so they will slide out easily and they also feel strong and do not flex. There are no screws, just bumpers that are easy to slip into the grove on the HD. Since I was not keeping the HD in the enclosure, I did not use the enclosed heat sink. The connecting cable (1) has an adapter so you can use USB 3 or flip it off to use type-C. It only comes with one cable as its expected you will only be using one side or the other, the M.2 NVMe or the SATA SSD.

I kept this enclosure along with my old ssd drive just in case. I now have a full backup if ever needed. This device worked well when installing a better quality and larger capacity NVME ssd drive.

It is what it says it is, and it works. Some points you may want to think about: This unit does NOT have a USB-c hub. There are two ports for two drives, and if you want to use both, you'll need two available c ports. Many systems don't have that yet, so be aware. The other is as others have mentioned, they don't offer a screw hold method for holding the drive. The NVME has a connector type that will cause the drive to spring up, and you don't want to use it unless it is firmly attached. There is a threaded hole where you would put a screw, but I didn't have a screw that would fit it (and I'm a tech, so I have most common drive screws handy). I didn't use the rubber things as they looked as stupid to me as everyone else says they are. If they wanted to do something different, they should have done a tilt and lock lever like some cash manufacturers have gone to. I was using it from drive duplication, so only needed a temporary attachment. In my case I just pulled the two cases, put the drives in, but an old Bic pen cap on each, and wrapped it with a rubber band. It worked fine (the heart of the thing is just a USB-c to NVME converter, it's really not that complicated. I gave 5 stars because it works, and I despise it when people dun products that that don't do what they expect, even when the description is accurate. It works as advertised for me.