Raspberry Pi Screen, 10.1 Inch Touchscreen Monitor 1024x600 Small HDMI Monitor w/Stand, IPS LCD Screen Display for Raspberry Pi 5/4/3/2/Zero/B/B+ Jetson Nano Win11/10/8/7, Driver Free

Works really well. You do need to possibly calibrate the screen. First, connect the cable via hdmi then connect the usb cable directly to your pc’s usb port. If it doesn't immediately start working, go to control panel and search for tablet settings. If it doesn’t show up as an option, it means your pc is not detecting the screen (try a different usb cable). If the option does show up, select the tablet settings and do a calibration. It will go monitor by monitor (in case you have several screens). Skip the monitors that aren’t touch capable. When it gets to this screen, just touch the screen. NOW, it’s been calibrated and should work.

The Screen is crisp and fast , the touch screen works with Windows 10 and Raspberry PI5 I could not get it to work on other Raspberry PI or Apple Computer So check what you have and make sure you got a 5A power supply ! 3A may or may not work I got mixed results.

The clarity and quality of this display way out performs others I’ve used in the category. It’s bright and crisp and exceeded expectations by leaps and bounds and considering I purchased it on sale for like $60; it’s easy to see why this thing gets 5 stars from me. Truly a wonderful display the touch is accurate and responsive. it came well packaged. My only criticism is the connectors being on the edge makes you have to consider them when making a case or installing somewhere. also It makes them vulnerable to getting snagged on something and breaking the connectors off the pcb. Soemthing I can live with though considering how good the screen looks. I hope future versions utilize a type C usb connector or perhaps two one for touch data from PC and the second for externally powering it. At times I wonder if the pi isn’t able to provide the full voltage/amperage it needs to run as the pi itself is requiring most of the power coming in from the 3A power supply. I often see the screen blank out and display the infamous raspberry pi low voltage indicator in the corner of the screen. When using it with other setups I’ve not experienced an issue but I have it installed as a infotainment system in my rv dash run by a raspberry pi that’s using a 12v to 5v3amp usb buck converter to power it. I’ve definitely noticed it has a hard time keeping up with the voltage requirement especially if I try to run it with the vehicle key turned to accessory position rather than with the engine running.

Good enough for a "PORTABLE" xbox one series X, super cheap price, decent quality, bright enough, and about 2K X 2K resolution

As a barebone screen with no case at all, it does have fairly good picture, and the touchscreen has been working great. I don't know the limitation as to why they need two separate USB-C cords (one for power, and one for touch signal), but it works. The decision to use mini-hdmi was a bad one also. I have had an issue where the screen will randomly just flicker off and right back on, but it doesn't affect its functionality, just an annoyance.

I have a linux pc as my daily computer. It was easy to find the right drivers to get the touchscreen working flawlessly. Out of the box I can control everything on my computer screen from my chair now if I want. i have it built into the arm-rest of my chair so I can control the screen on my pc, the tv, the lights in the house, and the home stereo from the screen on my lazy-boy.

Works great as a second monitor. Plugs into laptops and works right away. No installation. Only issue is it has an exposed backside. I would prefer a cover on back. Not sure why this odd design. Recommended to coworker.

Very unhappy, screen is good in basic function, BUT i had to add non-conductive washers (not included) to the Raspberry PI screw holes to prevent shorting the board! Also, there is NO CASING OR HOUSING! at all...nothing...once you add the required cables....it wont fit in the flimsy wire cradle.....WTF Who thought this was a good idea?

Kullanışlı

Ich nutze den HAMTYSAN 10.1 Zoll Touchscreen-Monitor für meine Home-Automation mit dem Raspberry Pi und bin absolut zufrieden. Der IPS-Bildschirm liefert klare Farben und eine gute Auflösung, sodass alle Bedienoberflächen sehr gut lesbar sind. Die Touchfunktion reagiert präzise und ohne Verzögerung. Der Monitor ist leicht, kompakt und dank des mitgelieferten Ständers flexibel aufstellbar - perfekt für den Dauereinsatz in meinem Smart-Home-System. Besonders praktisch ist die kompatible Anschlussvielfalt (HDMI, USB), wodurch die Einrichtung mit dem Raspberry Pi kinderleicht war. Fazit: Perfekter Bildschirm für Home-Automation-Projekte - zuverlässig, gut ablesbar und vielseitig einsetzbar. Klare Empfehlung für alle Maker und Smart-Home-Fans!

Funciona a la perfección como pantalla extendida de mi monitor pec. En mi caso lo utilizo como monitor pequeño secundario para mi simulador de vuelo. La función táctil funciona a la perfección una vez configurada en Windows para que sea la pantalla tablet por defecto. Viene con cable hdmi de calidad y también con cable micro usb para alimentarlo mediante puerto usb del ordenador. Se enciende automáticamente al encender el ordenador ya que no tiene botón de encendido. Es cierto que es un poco tosca porque tiene los bordes muy afilados y también porque la placa se encuentra a la vista, pero en su soporte queda muy bonita. Muy buena definición. Por este precio no se pueden poner muchas quejas.

Ottimo prodotto consegna puntuale

Ecran réactif qui fait parfaitement le travail. Seul bémol, la position des ports et les câbles fournis rendent la création d'un support d'écran en 3D compliquer, d'autre modèle (plus chère) proposer des choses plus simple. Mais pour le prix c'est parfait ^^