INCLY 2 Gallon Crystal Clear Epoxy Resin Kit, High Gloss & Bubbles Free Resin Supplies Coating & Casting for Table Top, Countertop, River Table,Wood, Jewelry Making, Art Craft, Self Leveling 1:1

The best resin I've used. I only buy it in the 2 gallon quantity and have always found it to be reliable and consistent. Bubbles dissipate as expected when hit with hot air in the art piece. Very economical if you're using lots of resin. Will certainly be buying more.

Although this is a 1/1 epoxy, it’s much more smooth and clear like a 2/1. I’ve used a lot of different epoxies and this one is fantastic! Cured slightly faster than other epoxies In’ve used. Great quality. I’ve already ordered again.

The media could not be loaded. I have been making resin art since the late 50s. The resin back then was horrible but you learned to deal with the tiny drops of hardener to huge pours and lots of drops with small pours.Modern resins are nearly all 1:1 ratio but they are all very different. I have used about 10 different suppliers and the best up to now was just too expensive. The second best (Let's Resin) was good but takes a longer time in the chamber to remove the bubbles. They last shipment was over two weeks so I ordered from two other companies. The one (Pixiss) burned my and ruined my molds.This Incly came in and I was cautious to try it on some old molds first. Wow!First it has nice consistency, mixes very well and takes dye very good. Second, I am running in a 70 degree room which normally extends the time in the chamber to about 15 minutes. This hit the break point in 3 minutes and was bubble free in 7. That is amazing!During the thick pours it got up to about 150 degrees in 20 minutes. That's perfect for my Hellfire skulls to add the alcohol ink and give it one full swirl.Then I ran a rose in the chamber. Again, 7 minutes and it was bubble free. Anyone who seals roses in resin knows how important that is.Then I ran the mini bathtub. I have a large order for these and they want marbled tubs. Not all the resin I use does a good job at this. This resin was flawless. Not a single bubble and a nice marbling effect.I still have that order coming for the other resin but after that, I am switching all my orders to this INCLY resin.Oh yes; The bottles are triple sealed! They have the stoppers which I like but they are also shrink wrapped in each bottle and shrink wrapped in the box. This is the best packaging of any resin I have ordered.Did I mention it is nearly half the price of the other resins. I'm sure that won't always be the case but I am super happy about it now.

Wish this brand was a quick drying, 4 hour demold.

It cures with few to no bubble. I like it will be reordering

I am impressed. I have been pouring resin for over 5 years now. My usual brand was discontinued and I was almost in tears. I’m a firm believer in using what works for you and I was so upset I had to find a new brand. I gave this a shot and was impressed right off the bat. There are bubbles in it, but I don’t stir slow, I’m too impatient. My vacuum chamber takes care of them in minutes. It’s easy to work with, it’s a thinner one than I’m used to so that does take some getting used to, but the results are phenomenal so I’ll get used to it. My clear projects are clear, a spray of alcohol gets rid of any remaining bubbles. It mixes well with my powders and liquid pigments and the colors stay vibrant. In about 10-12 hours I can demold, even though it is completely cured yet and reuse the mold. If you’re shopping for a new brand or are just starting out I highly recommend this brand. I liked it so much I bought the deep pour to test and was impressed with it as well.

I was so tired of getting resin that was junk from Amazon. It either didn’t mix right cure right or work right? Finally, I found this it mixes crystal clear with almost 0 bubbles before using the bubble remover or torch cures very fast demold in less than four hours if I had to find one complaint, it would be too fast. Be ready to use it when you mix it because within 15 to 20 minutes it’s already started to thicken, it even better I wish they would make a bigger package. The 5 gallon of each gallon is not enough for large projects.

This brand has to be the worst resin I’ve ever used. I had 12 coasters, two 6x6 paintings and one 12’ round to complete before the Saturday market. I went off the good reviews and should have paid more attention to the negative ones. Bubbles are almost impossible to completely get rid of from any project. For some reason it didn’t react well with the Le Rez epoxy paste and Amsterdam colors I used. I ran out of my KS brand and decided to give this a shot based on reviews and cost effectiveness. I followed the instructions perfectly, stirring for 5 minutes, which is 2 minutes longer than most other brands. Ratio of 1:1 was perfect using my pre-marked cup. I could blow the colors around to achieve the desired effect, but it kept wanting to pull the paint into little dots or lines due to some type of separation problem. But my biggest disappointment was the lack of self leveling. I checked my surfaces with a level and everything was set. After a disappointing first round with the colors, I’d hoped the 2nd coat would smooth things out. No luck with that idea. Other than returning it, I’m not sure what to do. Overall, I like the patterns of the Galaxy pours I’d done, but I may have to sand the tops and try coating with a better top layer. Thankfully, some of the paint separation happened with the metallic gold I’d used and it just made the galaxy have a few extra bright stars. It did seem to mix easily, other than the prolonged stirring time and amount of bubbles. I was able to achieve more lacing with the last resin I had on hand and less bubbles. It also seems like it wants to burn the resin a bit with little dots of hardened resin I have remove from the project. I really had hoped using a heat gun and final torch would have helped more with the bubbles. I’m only pouring thin layers/top coats. Working time is about the most accurate fact the seller’s description info lists. Additionally, the bottles came with product already leaking out the top of the rim. Thankfully, they were shrink wrapped in plastic and didn’t get on anything else. It’s been a complete waste of time to keep trying to fix what won’t work well, no matter what I do.