236304 CK Trend Wall-Mounted Electric Fan Heater, 1500W, 120V White

I didn't trust a random brand heater while sleeping in our trailer in the mountains, so I spent the extra money on this. The quality is apparent. It is awesome, so I bought my dad one for his office, which is always super cold. He loves it too. It comfortably heats in 30-40 degrees: LR/kitchen of park model camper on 50A service line or a 10x14 room with a window (and a very cheap landlord).

This heater works very well. It's decently quiet. Looks nice in the space. Loved that it has a thermostat. We were using it to temporarily heat a room that we were remodeling until the heating company could install the duct work. It worked great. Kept the room heated without having it turned up the whole way. It is a large room too. We are going to use it in our mudroom now that the other room has fixed heat.

We put this in a bathroom with very high ceilings. Mounting it low pushes heat across the tile floor. For the money, this is a great little heater, Since we were doing remodel I had an electrician install it. Glad I did so they could hardwire and change the breaker to accommodate 220. Also ran it through the wall so no exposed wiring. I really like the simplicity of this model. Really decent heat that you turn on when you want. Does what it's supposed to do without the funky digital bells and whistles. We started with their highest-end digital model and gave up on it and sent it back. Limited heat and impossible to program. Simple mechanical control is the way to go. I also quite like this company and their customer service, Very responsive and helpful. When I told one of their customer people about the issues I was having he directed me to this model. While it's their initial model and hard plastic, it still looks good and it works flawlessly. Noise is not an issue. If you want simple and dependable heat on demand, this is a great economical choice that looks good.

If you have the electrical capacity, skip over the 120v model and opt for the 240v 2,000W model. I installed this unit yesterday. I had an issue fishing the wiring, but that’s construction related and has nothing to do with the actual unit. Once I got the 14AWG wiring pulled from the breaker panel to the space between the wall, the remainder of the install was a breeze. I fastened it to the drywall with 3 toggle bolts and to get a super clean look for the wiring entrance, I used a 1/2” chase nipple and a 1/2” rigid coupling and drilled a 3/4” hole into the drywall. Based on the geometry of the back side of the 120V model, the 240V seemed like the way to go. So glad I did. The reviews and the methods in most others photos left something to be desired. But that’s none of my concern. Our basement is finished, but the previous owner did a poor job of adding the right amount of supply ducts to keep it warm in the winter. Not wanting to rip out drywall, I chose this $150 option instead. The basement in December through February usually averages around 58 degrees, so it’s basically unusable for us and our 2-year old son. I fired this unit up and within about two hours we were up to 67 degrees. Maintaining 65 now, I find the unit runs about 15 minutes on and 45 minutes off. Estimating our energy use and cost that’s about $0.04/hour. Likely around an added $30/month, but it’s only 3 months out of the year and the basement family room is the nicest part of the house. Totally worth it. As for the unit, I have no complaints. Installed super easy, wiring and safety circuits are all German engineered, so you know it’s good. Simple on/off side switch and a top mounted thermostat knob. We keep it on the 11 o’clock position and that seems to be pretty steadily holding the room at 65 degrees. Plenty warm enough for us. Now a little too warm in my opinion for the treadmill, but I love the cold. Highly recommended this heater to anyone and may buy a second unit for the guest bedroom in the basement too just for better customizable comfort.

Purchased two (2) Stiebel Eltron 236305 wall-mounted electric fan heaters for our home. Specifically ordered two, in case the older heater in the master broke, then I'd have two, in the home, that matched. Received the two heaters in time for our electrician to come out & install in guest room. He installed first one, tried running it, no luck. Now I'm not an electrician, so please bear with me.....Used tester to find issue. There's a long straight piece of wire (I'll say) on back of heater that's the issue. There's no power, from the wire to the remainder of the heater. Our electrician offered to install the second heater, thinking the first heater was a fluke. Well, after about 10 minutes of running the heater, the heat was on, but no fan came on. He offered to try & fix the fan, if he could, but I told him...NO WAY! There's no way I'd keep or want these heaters, if I have to buy two & neither one works properly. I'm very frustrated by the whole thing. I paid to have an electrician come out to install the heater...and now I have to pay to have him come out again to install a different heater. I will leave a note on each heater, as I package them up to return & have them consider testing their products before they send them out.

Works well

The heater works fine. I like that it sucks from the back and discharges on the bottom which is great for situations where the air is warm up high but cold on the floor. The mounting shown in the description is a wall plate used to attach the heater. My version deleted this plate and just has two top clips that hold a screw head. Being all plastic, they could easily be broken if something hits the side of the unit. There is one hole in the middle bottom to put a small #8 screw. They clearly wanted to save costs, but this is really cheap. The internal ground wire only attaches to the internal metal motor housing as everything else is plastic. The heater works as described, but I think I will modify the mounting somehow to make it more durable. So.... if you want a cheap 220V heater, it works but don't expect quality.

great product easy to install