1 Gal. DOMINATOR LG+ Clear Acrylic Sealer | Low Gloss Paver Sealer | Wet Look, Color Enhancing | Professional Grade | Concrete Pavers and Decorative Concrete | Fast Dry | Driveway, Patio and Walkways

Love this sealer and the finished look. Applied two coats to my brick pavers using a $10 garden sprayer. Very easy to apply, took less than an hour to cover 1500sqft. It is very sticky and hard to remove from hands, wear gloves!Most areas dried quickly with no issues. A few spots remained white and took up to a week to cure. White spots did appear after rain for the first month but stopped appearing when wet after a month or so. We have a outdoor stall type bathroom, it has yet to fully cure in that area and remains sticky, in hindsight I would have only applied one coat to this area as it didn’t need as much protection. Some ants have been able to make their way through as well as a few weeds, however not enough to matter. Sand lines can hold dirt after rains but they wash off easily with a garden hose.Overall a great product!

This sealer is easy to apply and looks great after everything dries. First off pressure wash and fill the cracks with sand before you use this. Wait a day for everything to dry and then apply. I applied this with a cheapie 1 gallon pump sprayer and a cheap paint roller on a pole. This project took me 2.5 gallons of the sealer for 2 coats on a 20'x20' patio. You want to do 2 coats to ensure proper coverage. I sprayed on then back rolled with the paint roller and that worked great. The pavers are well sealed and bead up water well. When I have to recoat I will for sure by this product again.

First container had chunks of dried sealer that clogged the pick up tube of my sprayer. Filtering with a fine mesh screen fixed the issue. The second container I got was fine. The end result was great. The sealer brought out the color like I wanted, unlike the cheaper sealer I tried prior on a small test area.Only 4 stars due to the frustration from needing to empty and clean my sprayer a couple times, and needing to filter the sealer before spraying. Both containers were well shaken prior to use.

I bought a 5 gallon bucket of LG+ for roughly 1200+ sq ft of 50 year old bricks. Published coverage rate is 250-400 sq ft/gallon. I used a typical 2 gallon pump applicator with no issues other than some slight clogging (rinse the sprayer well if leaving product in the container between coats). I power washed the bricks three weeks prior to application and swept the bricks by hand the day of application. I was able to completely and thoroughly coat the bricks 3 times (3600 sq ft with 4 gallons???) with about a gallon left over which I used on my concrete driveway (the results were just meh on that). The sand between the pavers has developed a hard surface which will keep it from being blown out and prevent weeds. The finish is a very subtle gloss that doesn’t look truly wet but adds a nice shine. Very pleased with the ease of application and cleanup, the coverage, and the overall results.

Product wasy to apply with sprayer and roller is some areas as in the company's video.Applied to pavers. Two coats. Good coverage with moderately porous pavers.Gives it low gloss but not really wet look, as I hoped for, as described on page and product.Slippery when wet compared to unsealed wet pavers. Leaves water buildups/drops on surface that causes it to be slippery. So I don't recommend applying around a pool and maybe not a walkway to house to avoid people slipping. Applied to back patio.Right half of picture with product on. Left side is without treatment.

Second time I have used Dominator low gloss paver sealer to seal our paver patio. Very, very happy with this product. Goes on very quickly and easily using a pump up garden sprayer and a paint roller on a long handle to back roll and areas that may have puddled. For reference, our patio is 20’ x 15’, so not a huge patio, and it took less than 10 minutes to lay down a coat. Goes on white, so you can easily see where you have sprayed, dries clear. Waited about an hour and applied second coat. Beautiful low gloss sheen, not at all slippery. No odor when applying. Wouldn’t hesitate to recommend.

I'm sure you can tell where the solution was spread from my photo.We have a 15x15 patio, 225 sq ft.The entire jug was good for about 1/3 of it, I had to go on heavy and spread it.Half way through the jug, I used a sprayer to evenly hit the rest of the patio. As you can see, it did nothing.It only took where I wet on heavy.It does look wet, but no glaze or shine.It claims to work on concrete pavers, but im incredibly disappointed.Theres nothing left to return, just a waste of money for me.

I bought this last Fall but the weather didn't cooperate so I had to wait for the snow to melt and the temps to rise enough to apply this to the pavers. After thoroughly cleaning the pavers I applied this with a roller and added Diamond GRIT PRO TECH Series to prevent a slippery surface. It was very easy to put on, I applied 2 coats allowing time for drying. Pavers look great! I saved money by not hiring someone to do this simple task. It took time to put this sealer onto the pavers but well worth the effort. I recommend this product and the grit by the same manufacturer.