Double Door Lock Cabinet Drawer Lock Safety Cabinet Lock Double Deadbolt-to-Door Lock [Installation on The Right Side Door]. Drilling Diameter 3/4"/19mm for (3/5"-/15mm -7/8"-/22mm) Door Panels

Installed them awhile ago but waited on writing a review until I had some more time with them. Installation took awhile, since I had to carefully measure before drilling and routing out a space for them in the door as well as an indentation on the cabinet side for the locking mechanism to go into.Overall they look great and they do the job well. They’re still holding up 6 months after installation.

These are exactly what I needed to lock up kitchen style cabinets to keep honest people honest. Being able to use one lock on two doors is great. Easy to install. I would 100% buy again. Thanks

The locks work well. I had a bit of trouble installing. They don’t come with any templates or instructions. I used a 7/8” bit and that fit perfectly. They look nice and although I can’t attest to long term function (I only installed them) they seem to work well. They are all keyed the same. Not a bad price, depending if they hold up over time.

Prefect for use in our RV. Keeps drawers and doors closed.

They work, just be cautious with your measurements when installing. Also, if I'm not mistaken, your doors cannot be thicker than 3/4" and bear in mind that your installation has to be within about an 1-3/4" from the corner of the door where you're installing this. Also, the lock cylinder requires a 3/4" drill bit to bore out the hole on the cabinet door where you'll be installing it. Today is September 1, 2022 I hope to come back and update this post with confirmed measurements and pictures of the installation, I do have one more to install.

I have a large gun cabinet with double door closing in the center. There is no center style so needed a lock that would lock one door to the cabinet and the 2 door together at the same time. These locks worked out great with one lock at the top and one at the bottom of the doors. Doors are about 42" high, oak framework with full tempered glass.

These seem to work pretty well, but offer only minimal security since the keys are not complex and easy to obtain. They won't work if the pair of doors have too large of gap between them. Also, my doors are 36" tall and I worry about having only one end secured that the door can flex to break in.My one complaint is that they don't provide the key dimensions for installation. One must drill a hole in the door, but no dimensions are given for the position of the center of that hole. My first hole was in the wrong place so I decided to just put it on the other door - but still got that one wrong, though closer. No instructions were included with them either - just the pictures on the product listing here online - so you might want to print those out.

Worked fine. As noted before, no instructions and no template. Easiest way to install is to make your own template by drilling a 3/4" hole in a piece of cardboard, place the barrel of the lock through the hole and then trace around the lock. Keep the template in case you decide to add other locks. Made the job easy and accurate.