🚙 See More. Miss Less. Drive Confidently.
The STINGER Jeep Wrangler AHD/CVBS Dual Blind Spot Camera Kit features a robust 5 Pin EchoMaster connector for secure Jeep Wrangler JL and Gladiator JT compatibility, a bright 0.33-inch LED display for clear visibility, a wide angle lens to cover blind spots, and a high-sensitivity CMOS sensor for crisp images in all lighting conditions—all in a sleek dashboard mount design.
| Item Dimensions L x W x H | 8"L x 6.5"W x 2.25"H |
| Installation Method | Dashboard Mount |
| Optical Sensor Technology | CMOS |
| Lens | Wide Angle |
| Connector Type Used on Cable | 5 pin EchoMaster |
| Display Technology | LED |
| Voltage | 12 Volts |
| Screen Size | 0.33 Inches |
| Compatible Devices | Monitor |
I**N
Works Great!!
Works great with the Stinger Heigh10 head unit.
B**A
How to wire it
I got these to go with my Stinger Heigh10. The installation instructions don’t show how to wire it to the head unit. It turns out that you extend the cords with the included extension cords by pulling them apart where they look like they would match on each camera wire. Red with red, and white with white. Then at the head unit, you pull it out and plug the yellow plugs into any available yellow camera inputs. I used 3 and 4. Ignore the trigger wire inputs. On the head unit wiring, there is a 12v power output where one is red, and one is black, that look like where your wires go. Pull back the clear plastic protecting them, and put red to red, crimp it together, then pull the protecting plastic back. That will power the cameras - both reds for both the cameras in there. Now do the same with the black wires - put them both in the black one and crimp them to ground them. The last step will be, after replacing your radio, to add the cameras to the software and they have a video on that. I was glad I did this while installing the heigh10, I wouldn’t have wanted to pull it out again. They do a great job, and come on when you’re moving over 5mph and you turn on your blinker. You can also access them through the menu. It takes about one second to come up after the blinker is on, but I don’t mind.
D**T
Nice addition to our Jeep!
Bought these for our Jeep. Helps with blind spots when switching lanes for sure. Had a problem with one of the cameras and the company sent us the parts we needed to fix it.
T**.
Nice addition
When going to monitor after putting on turn signal delay is is long.
T**H
Great addition to Jeep
Cameras work greater with Stinger HEIGH10+
J**N
Whole new head unit for your car in order to make these work
How to send the cameras back because I found out that you had to buy a whole new head unit for your car in order to make these things work I like my Alpine so I sent them back
J**B
Great Product. Sees well in low light. I would buy this again
Products work better than expected. the only thing that sucks is the delay time between flipping the turn signal on and the cameras starting. So be aware of this before adding them to the stinger unit.
P**G
False Advertising, Deceptive!!!
Deceptive!!! They don't tell you that these cameras will NOT work with the factory radio.
Trustpilot
4 days ago
2 weeks ago
