Omix-Ada13516.18 | Soft Top Bow Bracket, Right, 1&4 | OE Reference: 68163704AB | Fits 2013-2018 Jeep Wrangler JKU 4-Door

These brackets are a perfect fit for the jeep and soft top. Will absolutely order again if needed

Works well. Note that this is for JK Wranglers 2011 and after AND with soft tops made 2011 and after.I had a older top (I think from a 2010) on my 2014 JKU, with different brackets. Still had the old brackets from my old top, replaced with a newer OEM premium top (from a 2014), and the brackets didn’t work with the soft top frame. So these brackets were perfect fit.The screws you need are M6 (6mm) x 1 x 25mm. You can order stock ones but any hardware store will have them, I got mine from Lowe’s for less than $2 a pair.During installation, I would recommend putting the soft top all the way on (latching the front part on) and sliding the bracket onto the plate on the soft top frame, then screwing the top hole on this bracket into the frame of the car (then going from there with the other screws). It was difficult to push the bracket to the car frame with the bracket all the way screwed onto the soft top.Note that this is only one side, you’ll need to order the other side if you need both.

Fits my 14 JKUR perfectly. This bracket works for the factory Bestop premium twill soft top with spring assist. The brackets only came on a JK from the factory with the soft top or dual top option. My JK had the hard top only option which did not include them.I bought a used soft top and the brackets were missing. I checked with the dealership and their price was similar to these but they didn't have them in stock. I ended up ordering them on Amazon for convenience. They feel solid and my top went on without a problem. Keep in mind these do not include bolts to attach them to the roll bar. I purchased those on Amazon as well, but a hardware store is a much more frugal option. Also this is the right side only, don't forget to order the left as well.

Fit my 2010 JK soft top perfectly. Easy install.

I got these brackets for the soft top on my Jeep and they fit perfectly.

Product was as expected. The only downside of this is you have to buy the different sides separately! And you also need to purchase the screws separately also.

Good Quality and it fit my 2017 Jeep Wrangler to be able to install my Soft Top.

Fit a 2007 4 door JKU with a 2017 factory top with no issues at all. 13516.19 is the Left side.You will likely need bolts. m6 x 1 x 20mm is what I used. I needed 8 total and found them at lowes at about a buck each. Factory bolts come with built in washer so you may need a washers depending on the actual bolt you find.

First great for my 2011 jeep wrangler.

Nice Product and Worked as intended

I bought this because our local parts shop sent me 2 of the same side. The one I bought also actually cost less than the shop and was promptly delivered to my doorstep. I should have known then I would have bought it here straightaway. It works and it looks and feels like OEM.

Ordered as part of items needed for my Jeep’s soft top. Works perfectly.

This is the right hand side only and no bolts. Perfect fit for JKU.